Search results

  1. blue_kjR417

    Lower Ball Joints and Front Coil Overs

    You could make that work but it would be much easier if you could get the entire knuckle off and place it in a vice to use the ball joint puller/separator. The only other things prohibiting the entire knuckle removal is the CV Axle nut if you have a 4x4 and the upper ball joint. The CV nut is a...
  2. blue_kjR417

    Changing diff ratio on 3.7L Liberty 2002 model

    I'm in the process of doing this very thing, I was able to source a local front axle assembly from an 04 2.4L through a local salvage yard. I had to order the rear axle assembly online from a salvage parts website its from a similar 2003 2.4L model. Both came factory with the 4.10 ratios and I...
  3. blue_kjR417

    Lift on high mileage KJ?

    Mudduck I just bought an 05 KJ with 162K for $3000, I just spent over $4000 on OME 927/948 spring set with corresponding shocks and struts, front and rear replacement axles with 4.10 gears, black powder coated MOAB's, and 4 new 265/75R16 Nitto Trail Grapplers. Yeah its crazy but I plan on...
  4. blue_kjR417

    JBA rear springs

    That's what I was afraid of. I want to lift as much as possible in the front but can't afford more than the ome struts and coils up front so I guess I'll just have to do 2 extra isolators on each side in the rear to level out I just wanted to try those jbas and not have to use extra isolators...
  5. blue_kjR417

    lift and tires

    I called fletcher here in town Joey they said they could flash the computer and it would be 1 hour diagnostic fee about $108 with taxes they said
  6. blue_kjR417

    JBA rear springs

    Does anyone have any pics of a kj on the OME front springs and jba rear springs, I'm trying to decide too if I should run jba rear's tom said it will be between 1/4 and 1/2" higher in the rear. My previous KJ after lifted sat 1/2" lower in the rear and it looked level so if those springs are...
  7. blue_kjR417

    gears

    be sure to send me pics when you get it together!
  8. blue_kjR417

    Hello anyone from Fayetteville Arkansas

    I'm sure Arkansas State has some sort of position in that area, they have a very large portion of Chinese and middle eastern students who could use a course or two!
  9. blue_kjR417

    Hello anyone from Fayetteville Arkansas

    Come on to Arkansas tom tons of trails here in the natural state and we could always use more lifted kj's! What does you wife teach? My mom is and adjunct professor at Arkansas State here in Jonesboro. Jonesboro is a great place to live! Exceptionally low cost of living in comparison to the high...
  10. blue_kjR417

    Questions About Lift

    Do JBA 4" rear springs with stock isolators and the JBA Y-Link sit level with a OME927 over and OME HD Strut with 1/4" top plate and 3/8" clevis up front with JBA UCA's or will the rear sit higher with stock bumper and tire carrier maybe 150lbs of gear in the cargo area? And if I run JBA 4" rear...
  11. blue_kjR417

    Anyone recognize this KJ?!

    Joey said he'd seen it in this area 2 years ago but I've never seen it here. Jonesboro serves a large metropolitan area though.
  12. blue_kjR417

    drive shaft

    I'm about to have to do the t-case end of both mine and the wife's. I found a great write up on here for the project and found the parts kits for $45 on ebay.
  13. blue_kjR417

    Suggested Torque Specs When Reassembling Suspension

    I know but it came with the MOAB's and Its better than the stock 235/65/17 back there now lol there is only a 1/2" difference in radius.
  14. blue_kjR417

    5 Moabs from 2004

    Yep the market for them seems to fluctuate some I stole mine basically but I did drive 70 miles one way to get them. And they show their 11 years of age too but for the price I didn't care because that allowed me to afford powder coating which is what I wanted anyway. Besides someone should pay...
  15. blue_kjR417

    05 WK vs 05 KJ Motor, Trans, and Gearing

    Are you saying my cousins wk has a 5 speed too? That would make since because I drove his with 32's and it still had plenty of power to haul the jeep its self around, now he said when he hooks to a trailer its done for but alone its ok and the 5 speed would make sense given that I determined he...
  16. blue_kjR417

    Suggested Torque Specs When Reassembling Suspension

    Thanks for the manuals that's great info! As far as clevis bolt, both of my 05's have had the larger one but they were both manufactured in late 04 so that may be why.
  17. blue_kjR417

    Suggested Torque Specs When Reassembling Suspension

    I'm planning out my build for my new KJ and while making my parts list I was wondering if anyone has any factory or self proclaimed torque specs for the bolts and nuts of the KJ suspension. This is my parts replacement list so obviously there will be a lot of disassembly and reassembly just...
  18. blue_kjR417

    Anyone recognize this KJ?!

    Sorry to bring back the memories tom, I think its ugly myself. Not tasteful at all just wanted to talk to him because its rare to find a fellow KJ'er in this area.
  19. blue_kjR417

    Anyone recognize this KJ?!

    My cousin works at a local Chevy dealership and he sent me this pic yesterday afternoon said this KJ was looking at trading in on a new pickup. I don't like far from the dealership so I rushed over there to try to meet the guy and look over his rig but missed him. My cousins said he was running...
  20. blue_kjR417

    New purchase questions

    Not a terrible price for the mileage, check to see if it still has the full factory skid plate package, motor, trans, t-case, and gas tank they come factory on the renegade models.

Random media

1729.jpg
new jeep
IMG 3125
image
frontfront2
FF1F5A10 0B51 4B5A 85FD DF4785112CAD zpskv3m8kuc
11
in the middle of the 2nd crossing
DSC00448

Latest posts

Members online

No members online now.
Total: 345 (members: 1, guests: 344)
Top