Search results

  1. Slugger103

    What did you do to your jeep today?

    Put her up on jack stands, dropped the transmission pan, changed the filter, cleaned the pan inside & out, painted the outside of the pan, new gasket & pan back on. New ATF+4 full synthetic fluid. When I dropped the pan, I inspected & cleaned the magnet & was pleased it was virtually free of...
  2. 1970

    1970

    Wam bumper
    • Slugger103
    • Media item
    • Comments: 0
    • Album: 2004 KJ Limited
  3. Slugger103

    Aftermarket bumper?

    Anyone tried or used a Wam wincher bumper? Stumbled across this today while looking at KJ YouTube videos. https://wambumpers.com/store/custom-products/2 1970 by Slugger103 posted Nov 13, 2020 at 9:24 PM
  4. Slugger103

    ARB Bumper Install

    I thought 927's were the heaviest duty OME springs you can get for the liberty? I will be adding a winch (one of the main reasons for having that bumper). 790's instead?
  5. Slugger103

    ARB Bumper Install

    That's correct. Going to get 927's up front with new struts BEFORE the ARB bumper. Sometime next year, when I get the bumper in the driveway I'll take a look at how it hooks up and I "assume" there might be instructions that come with the bumper. I think I'll need to modify the front fender...
  6. Slugger103

    What did you do to your jeep today?

    Been looking at those tires....let me know how you like them.
  7. Slugger103

    ARB Bumper Install

    I've been considering buying an ARB bumper for my 2004 KJ Limited. The OP's link for the install instructions is now a dead link. Anyone else out there have a copy they can share?
  8. Slugger103

    What did you do to your jeep today?

    Finished re-installing the carpet & giving it yet another good vacuuming. Installed the trim all around, reinstalled the center console after cleaning it, installed the driver's seat & torqued the 3 bolts/1 nut, reattached the driver's seat belt anchor bolt to the seat & torqued it, replaced the...
  9. Slugger103

    Identify your gear ratio

    Yep - ran my VIN...it's there. All 4-Speed Automatic Transmissions Dana 30/186MM Front Axle 3.73 Rear Axle Ratio Corporate 8.25 Rear Axle
  10. Slugger103

    What did you do to your jeep today?

    Got an answer back from Jeep: Thank you for contacting Jeep Customer Care. We are delighted to learn of the satisfaction you have obtained from owning your 2004 Jeep Liberty. While we continue to enjoy a reputation for Excellence in Engineering, we are sure that all of the extra care you...
  11. Slugger103

    What did you do to your jeep today?

    I just sent an inquiry to Jeep & Chrysler customer assistance to see if this is still happening. We'll see. Never hurts to ask!
  12. Slugger103

    What did you do to your jeep today?

    Installed new thermostat, upper & lower radiator hoses, new coolant tank & connecting hoses, new valve cover seal on driver's side valve cover (painted the cover while it was out), new serpentine belt and tensioner/idler arm.
  13. Slugger103

    Water leak- passenger side- quick fix

    Dunno. Found a mouse nest and a snake skin under the cowl. When I removed the air cleaner housing & took the old filter out I found a dead mouse in there also! This KJ had been abandoned in the back yard by the ex-wife for almost a year. She did keep going out, starting it and drive it once in...
  14. Slugger103

    Imogene Pass in a KJ?

    It's been added to my bucket "west coast trip must do locations" list.
  15. Slugger103

    What did you do to your jeep today?

    Guess I got lucky! Mine was only at the weld below the windshield. Glad I caught it in time!
  16. Slugger103

    What did you do to your jeep today?

    Only after I sprayed it with Flex Seal.
  17. Slugger103

    Serpentine Belt Tensioner - Watch Out For This

    Mine is all original at 207K, so I guess I got lucky. However it is one of the parts I'm changing this week seeing how I needed to do the belt anyway. New one already sitting on my bench awaiting install.
  18. Slugger103

    What did you do to your jeep today?

    Sealed the weld area on the passenger side under the wipers cowl and stopped a persistent water leak on the passenger side.
  19. Slugger103

    Water leak- passenger side- quick fix

    Reference my previous post with picture...the weld (lower left of the picture...covered in debris) had what looked like a couple gaps. Since I had run out of silicone RTV I ended up cleaning the area real good & sprayed 3 coats of clear Flex Seal over the holes, cleaned up the cowl area and put...
  20. Slugger103

    Water leak- passenger side- quick fix

    Took the cowl off, removed the air intake baffle and noticed the seal while in one piece looked old & worn. So...after cleaning the entire area and the mounting surfaces of the piece I put down a thin bead of silicone on the underside of the baffle, put the seal back in place then ran another...

Random media

the worst of the damage was contained to the fender & hood
What an ARB Bumper and Warn M8000 look like not yet installed.
Play Day
image
One of the oldest pics I have of her
04, jeep liberty limited edition 3.7
Ready for some wheeling!
Driving on the beach in Corolla , NC. (OBX)
IMG023

Latest posts

Members online

No members online now.
Total: 298 (members: 0, guests: 298)
Top