Search results
-
N
Overheating again
I know you said you checked the hoses, but rev it up and make sure a hose isn't colapsing at hi speed. Seems you did everything else.- Neal
- Post #20
- Forum: KJ General Discussion
-
N
fog lights w/highbeam mod question
No you screwed up, do it the way is was written up- Neal
- Post #2
- Forum: KJ General Discussion
-
N
URGENT HELP!: Fuse 26 keeps blowing...
Decouping caps are just for hi freg swiching noise--the meter should not see these as a low point to vdd.- usually .01 caps Think it is time to start removing lines from cuicuit loop/string to isolated the grnd fault causing the fuse to blow. Of course if you have umlimited money, just jumper...- Neal
- Post #32
- Forum: KJ General Discussion
-
N
P0132 Code/O2 Sensor bad?
check the wires at the o2 sensor- Neal
- Post #2
- Forum: KJ General Discussion
-
N
Free Liberty, what do i do?
oil pressure sensor dave beat me to it- Neal
- Post #6
- Forum: KK General Discussion
-
N
One normal plug, 5 fouled
I think they are on pressed in studs, but thinking more that would keep the valve closed--- There has been issues with valve springs breaking--that sounds more like it.- Neal
- Post #17
- Forum: KJ General Discussion
-
N
One normal plug, 5 fouled
Yes, valve stuck open, but the piston must be hitting the valve too! Pull the valve cover and see if rocker is off.- Neal
- Post #15
- Forum: KJ General Discussion
-
N
Transmission Pan Gasket Fluid Leak!
It could be the 2nd from the rear-not sure from memory-I know it was 2nd from somewhere on drivers side. I sealed the correct one cause no leaks. I just used ultra black and made sure to go around holes good and degreased the holes and the bolts on the side that needed thread sealer. Check out...- Neal
- Post #31
- Forum: KJ General Discussion
-
N
Transmission Pan Gasket Fluid Leak!
The 2nd bolt back from the front, on the drivers side, according to the shop manual needs to have thread seal to prevent leaking.- Neal
- Post #29
- Forum: KJ General Discussion
-
N
pinion reset
The term RPM relative to tires, means revolutions per mile. Which is a valid statement.- Neal
- Post #5
- Forum: KJ General Discussion
-
N
'04 Windows Don't Work
I don't think anyone else has ever had that problem- Neal
- Post #2
- Forum: KJ General Discussion
-
N
Small Oil Leak
Make sure the filter is tight-and check the oil pressure sensor to see is it is leaking-known problem.- Neal
- Post #2
- Forum: KJ General Discussion
-
N
brakes
The master cylinder is bad, leaking internally. Replace master cylinder and bleed.- Neal
- Post #7
- Forum: CRD KJ's Section
-
N
Oh no.. A Leak.. But from what??
differential pinion seal, you have to measure torque before and after R&R- Neal
- Post #4
- Forum: KJ General Discussion
-
N
Oh no.. A Leak.. But from what??
The seal is worn out, replace seal- Neal
- Post #2
- Forum: KJ General Discussion
Latest posts
-
Temp going up when going over 60 mph in highway for long time- Latest: uss2defiant
-
-
-
-
