7 way trailer plug mount

[AFT2008KK]

Hi All. Working on replacing the 7 way trailer plug. Hitch got rear ended and pushed the old plug into / through the metal mount. Anyone have a decent picture of how that mount is supposed to look when bot damaged. Id like to pop in a new oem plug.

Here is what im working with. And Thank you!

You must be registered for see images attach

You must be registered for see images attach

 

[lfhoward]

Sorry, mine is no longer OEM!

You must be registered for see images attach

I have been rear ended before though, with similar effects on the tow wiring bracket. It can be pounded back into reasonable shape with a hammer.

 

[AFT2008KK]

I like that hitch! The pix are after a bit of “gentle persuasion”. Thinking it is 80% back. Worst case it comes off and plug gets tucked out of the way of rocks and ledges etc

 

[lfhoward]

I like that hitch! The pix are after a bit of “gentle persuasion”. Thinking it is 80% back. Worst case it comes off and plug gets tucked out of the way of rocks and ledges etc

This is what I tow. It started out as a USMC M116A3 generator trailer.

You must be registered for see images attach

 

[Luke]

Hey…!
I’m only half way through the build thread … I wasn’t supposed to see that yet!

 

[AFT2008KK]

Hey…!
I’m only half way through the build thread … I wasn’t supposed to see that yet!

This is what I tow. It started out as a USMC M116A3 generator trailer.

You must be registered for see images attach

Hey…!
I’m only half way through the build thread … I wasn’t supposed to see that yet!

And now i have to go catch up on it.