Actual Lift Amount - Lets Compare Fender Heights

[WickedBruce]

I'll be ordering the full OME kit, top plate set, and 2 upper iso's for each side on wednesday!

 

[iamweasel]

Fender Heights after my new Camil Suspension lift:
LF: 20.9"
RF: 20.9"
LR: 21.7"
RR: 21.6"

 

[hectikart]

had my jeep on blocks yesterday doing some work which let the coils rest...
stock suspension 82,000 miles.
I got 19" exactly all around after I put it back on the ground. Less than a day later and I'm already back down to 18"

Hoping the Ironman lift with with 15mm trim pack will get me back up around 21, 21.5"

 

[Honduras]

Front: 25.5"
Rear: 24.5"

Por Fin!

 

[tommudd]

had my jeep on blocks yesterday doing some work which let the coils rest...
stock suspension 82,000 miles.
I got 19" exactly all around after I put it back on the ground. Less than a day later and I'm already back down to 18"

Hoping the Ironman lift with with 15mm trim pack will get me back up around 21, 21.5"

clevis and top plate for more lift

 

[Elmer]

Sitting right around 18.5" front and back today. OME 927/948 lift with clevis, JBA top plates, and 2 upper isos will be installed tonight/tomorrow. Will report back.

 

[Elmer]

22" at all 4 corners today. Muuuuch better.

 

[tjkj2002]

Still got you all beat:shrug:

After 18,000 miles with my lift I'm at 28" front and 27" rear.

 

[hectikart]

'06 Sport
84,000 miles
stock suspension was at 17.75" in the front and 18.5" in the rear.

Ironman front/rear coils and shocks, 1 rear upper iso each side, 15mm trim pack on front struts...
Front: 21"
Driver Rear: 21.75"
Passenger Rear: 22"

I will be adding a 3/8" clevis soon to level out the front.

 

[badkittystt]

Still got you all beat:shrug:

After 18,000 miles with my lift I'm at 28" front and 27" rear.

This is probably a silly question because, well, I'm silly, but can you notice that 1" between the front and the back? I have no doubt you did it on purpose, I'm just curious to learn why?

 

[Luke]

Before:

18.5 18.75
18.75 19

After Frankenlift II --- but before beating on the front springs

23 23
21.75 22

 

[tjkj2002]

This is probably a silly question because, well, I'm silly, but can you notice that 1" between the front and the back? I have no doubt you did it on purpose, I'm just curious to learn why?

Yes I can notice and yes done on purpose(well more like on accident) to put the rear(at ride height) in the middle of the shocks stroke.

I could just add those extra 2 rear upper isolators like I had in there to level it out more but the coils moved to much so they were removed.

 

[badkittystt]

Gotcha, thanks!

 

[Gyro]

07 Sport,66,600kms

before
LF 18.5 RF 18.5
LR 19 RR 19

after OME Med springs, OME shocks, jba uca,BFG t/a KO 245/75/16

LF 22 RF 22
LR 21.5 RR 21.5

Rubs at front and pinch weld.

Gyro

 

[Elmer]

Rubs at front and pinch weld.

Pound those pinch welds and trim that bumper and you'll be golden.

 

[WickedBruce]

Went from 17 in front, 18.5 in rear to 23 all around. Anyone have a step stool?

 

[tommudd]

Went from 17 in front, 18.5 in rear to 23 all around. Anyone have a step stool?

ha ha makes a big difference doesn't it

 

[WickedBruce]

Yea when we lowered the lift down we thought it was gonna sink a little bit. Nope. Huge as f***

 

[hectikart]

ha ha makes a big difference doesn't it

Definitely does! I love it. I was at a parts store last night picking up a few things and the kid at the counter came out to look at my jeep...If you remember a while ago I said I had never seen a lifted Liberty near me before. Well apparently neither had he because he goes "Dude, is this thing lifted?? That's pretty :favorites68:'n' sweet" lol

 

[Luke]

added 2 extra isolators to the rear drivers side ... 1 on the passenger side

Front 23 - 23
Rear 22.5 - 22.5