calbear: no longer a baby cub

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Moab

New Member
Joined
May 28, 2010
Messages
413
Reaction score
2
Location
Silver Spring
pics as promised (sorry taken with iphone)

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach

That looks really good.
So what did you get in the front from this kit?
*Center of front hub to bottom of front fender lip?
Thanks for a measure?
 

Moab

New Member
Joined
May 28, 2010
Messages
413
Reaction score
2
Location
Silver Spring
Are you using stock Upper Control Arms?
How are your CV angles?
Did you get pretty close to spec on your alignment?
I like the color of your KJ - haven't seen it before.
 

calbear

Full Access Member
Joined
Aug 22, 2009
Messages
80
Reaction score
0
Location
Turkey
Moab,
I've seen yours questions but I am away from my jeep for a week.
I'll reply all when I return home
 

Midgear

New Member
Joined
Nov 23, 2009
Messages
897
Reaction score
0
Location
Mcalester, OK
you home yet? LOL

This lift looks really good, and I like the fact that you didn't need to add any spacers conduit nuts or isolators to make it look this good.

are you running stock upper control arms?

did you order this as a kit or did you order the parts seperately?

Is your liberty a CRD? or 3.7L ?

do you get any rubbing at all while making turns?

I'm in dire need of new springs and struts, and I'm looking to replace JUST the springs and struts, without adding all these spacers and isolators or any of that.
 

kjweston

Full Access Member
Joined
Feb 2, 2009
Messages
866
Reaction score
2
Location
Boca Raton, FL
17.5MPG?? i could only dream of that.. I'm averaging 13.1 right now with 265/75/r16s.. cant wait till they are done so I can go to a smaller wider tire.
 

calbear

Full Access Member
Joined
Aug 22, 2009
Messages
80
Reaction score
0
Location
Turkey
sorry for not posting this earlier, just did not have the time(energy) to take the measurement until now

all around surprisingly level at 21.45 inches. i am pretty sure it has leveled since the initial lift.

my kit does not include any spacers. only OME HD/MD springs, bilstein yellows(liberty in front/durango back), terraflex and daystar bumpstops. (245/70/16 dueler revo2 tires)

my only concern is front right shock which makes a hard thump coming off bumps. I think it is a bit short for the springs. but why doesn't the left one do the same? :confused::confused:

also for the ones looking at OME, they are real nice but they soften after some use so def get the HD ones.
 

Latest posts

Members online

Top