ZeroCool84
New Member
- Joined
- Nov 24, 2019
- Messages
- 14
- Reaction score
- 3
Hello all,
Looking to put a CB in my KJ and have narrowed down my options to a President Bill mini CB radio and doing a stock antenna swap (by drilling out the current threading for the 3/8-24 threading needed on a firestik antenna.
I've seen the tutorials and while they were helpful, they didnt answer a few of my questions.
A few questions before I start making modifications:
Looking to put a CB in my KJ and have narrowed down my options to a President Bill mini CB radio and doing a stock antenna swap (by drilling out the current threading for the 3/8-24 threading needed on a firestik antenna.
I've seen the tutorials and while they were helpful, they didnt answer a few of my questions.
A few questions before I start making modifications:
- The firestik a1 converter in the turorials doesnt seem to be readily avaialble. Does this option perform the same function: https://www.amazon.com/gp/product/B00HPH23LA/ref=ox_sc_saved_title_1?smid=A3ELPGJLYNL7Q4&psc=1
- Does the firestik firefly antenna still allow for use of the AM/FM function in the vehicle radio? If so, does it allow for it both with and without the converter linked above? Meaning if I just installed the CB antenna on my vehicle without the converter (which may happen in stages based on funding), will my am/fm radio still work?
- 3ft antenna OK for CB comms mounted on the factory antenna spot? I'm hesitant to go much longer based on the tutorials I've read and not wanting to put too much stress on the factory mounting point.