No blinkers, hazards, or flashers when locking/unlocking

[tcountry335]

I have a 2007 Jeep Liberty Sport; all the lights work, turn signals, and 4-way flashers work; the problem is, when I remote lock and unlock the doors using the factory alarm, none of the lights flash; I checked the fuses, and all are ok, need help? Anyone have any other ideas. Horn honks when I remote lock the doors, but no lights.

 

[DadOSix]

I have a 2007 Jeep Liberty Sport; all the lights work, turn signals, and 4-way flashers work; the problem is, when I remote lock and unlock the doors using the factory alarm, none of the lights flash; I checked the fuses, and all are ok, need help? Anyone have any other ideas. Horn honks when I remote lock the doors, but no lights.

Welcome!


There is a setting in older KJ models that can enable / disable exterior lights

Thread 'HOW TO: Tweak your Keyless Entry settings'
https://www.jeepkj.com/threads/how-to-tweak-your-keyless-entry-settings.25640/

 

[tcountry335]

I tried this several times, and the lights still do not come on.

 

[DadOSix]

I tried this several times, and the lights still do not come on.

Another alternative is to program them with the overhead EVIC (info center) if installed on your jeep.

 

[tcountry335]

Do not have an overhead EVIC

 

[DadOSix]

Do not have an overhead EVIC

I have nothing then. Maybe a friend or shop that has a high level scan tool could see what the data from the computer is doing.