How did you Lengthen your rear diff breather

[family KJ]

I wanted lengthen my breathers on the diffs. The front seems to be fairly high (just about up to the top of the battery, the rear is what I am worried about.

So, Where did you lengthen your breather to and how did you attach it?

 

[LibertyTC]

I just searched the how to and I thought it was in there.
Anyways, I remember reading that it was extended up along the fuel filler pipe close to the filler cap. (zip strapped)?

 

[JeepINgeek]

ive wondereda bout this too..

on lost they have a howto but the pics are dead.. is there another thread around for breather tube lengthening?

 

[J-Thompson]

IMO kind of pointless
the breathers are mounted higher than the "computers"
if you were to get water in through the breathers it would be the least of your worries

The only "breather" mod I can see doing is the one on the TF999 found in pre '03
Wranglers
the breather is a hole at the top of the bell housing
but you need to drill a hole and tap the current hole as well as drop the trans
this is why most people just wait until the trans needs a rebuild then deal with it

 

[family KJ]

I just searched the how to and I thought it was in there.
Anyways, I remember reading that it was extended up along the fuel filler pipe close to the filler cap. (zip strapped)?

I can see that, I will have to look into it. Thanks