Manifold Absolute Pressure Sensor Connector

[Patrick McGrinder]

2007 Jeep Liberty got a P0108 code Manifold Absolute Pressure/Barometric Pressure Sensor Circuit High ..while looking at the MAP sensor I noticed one of the wires was completely off. I need a new connector for the MAP and the coolant temp sensor, before I start pulling things apart is this a easy / hard job ? I spliced it back together and the code is gone. Thanks !

 

[KJowner]

I would think the hardest part would be finding the right new connectors. Might be easier to get second hand ones with a reasonable length of cable on them. I'd wind nice clean wires tightly together, solder and heatsrink then tape back into the loom.

 

[Patrick McGrinder]

Thanks for your help !!!

 

[DadOSix]

2007 Jeep Liberty got a P0108 code Manifold Absolute Pressure/Barometric Pressure Sensor Circuit High ..while looking at the MAP sensor I noticed one of the wires was completely off. I need a new connector for the MAP and the coolant temp sensor, before I start pulling things apart is this a easy / hard job ? I spliced it back together and the code is gone. Thanks !

I dont know if Napa has everything, but I was able to source some jeep connectors as a special order from them in the Belkin parts line. 2 for my chevy cruze and a jeep bit.

 

[Patrick McGrinder]

Napa is where I got both pieces, thanks !