window does not work metal cable comes out through plastic tube

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

james23912

New Member
Joined
Jul 1, 2021
Messages
2
Reaction score
0
2006 Liberty Sport, a while ago trhe driver's window would not work, I read about it being motor or some clip at the bottom, but when I took off the door panel I saw that the metal cable was sliding out of the plastic tube that keeps it in place so I put a clamp type thing over the break and it worked for a while, then broke further down so I slit a piece of garden hose and clamped it over the breaks and it worked for a while but now has broken again further down and getting lower and hard to reach, is there a way to replace the whole thing or some other fix?
 

David13

Full Access Member
Joined
Dec 12, 2020
Messages
256
Reaction score
121
Location
Central Utah Rocky Mtns
Yes. Probably replace the regulator, as the inner door mechanism that opens and closes the window is called. I'm seeing $105 online. Try your dealer, parts department, or online.
dc
 

DadOSix

Full Access Member
Joined
May 20, 2020
Messages
834
Reaction score
477
Location
Cumberland, MD.
Unfortunately, no one I know has found an affordable replacement for that tubing. I suspect it is just like polyethylene flexible water line.

I did not have any luck finding an exact fit.

On any parts yard run , i take a booster pack and search the available kj donors for good regulators. I have a spare one of each, as I have 2 kj on the road

also - some inexpensive whole units on ebay - about 40 bucks. not oem - just fyi
 

james23912

New Member
Joined
Jul 1, 2021
Messages
2
Reaction score
0
thanks for the help, I had seen the term "regulator" and thought it was something solely for the electronics, so I will give this a try
 

michael mehle

Funky Clunky Liberty
Joined
Jan 29, 2020
Messages
21
Reaction score
5
Location
Maple Grove Minnesota
I've purchased 2 regulators so far from Amazon at about $40 each. Work well. Super easy replacement. Motor a little weak it seems but 2 yrs now no issues. 2nd one I even put Moly on all contact points. Helped some.
 

Johnny O

Just hangin' out.
Joined
Apr 29, 2021
Messages
2,533
Reaction score
3,498
Location
Bellevue NE
In this case I bet this is the issue. Exact symptoms I had:
You must be registered for see images attach
easy fix. If the motor stil works you can use it to get the cable back into the tube easily.
 

DadOSix

Full Access Member
Joined
May 20, 2020
Messages
834
Reaction score
477
Location
Cumberland, MD.
So the regulator is repairable??
It is to some extent. Depends on where the break is. The clip in the above post is what likely breaks. I just did 2 over the weekend. About 20 bucks amazon or ebay. There is also a metal clip that is used. If the 'tubing' is broken, i've never found anything that works decently to replace that.
 

frankjc

Member
Joined
Feb 15, 2020
Messages
40
Reaction score
13
Are we talking about KJ, or KK? We are in the KK forum.... My 2012 KK looks like this....
 

Attachments

  • reg1.jpg
    reg1.jpg
    183.9 KB · Views: 4
  • reg2.jpg
    reg2.jpg
    163.5 KB · Views: 4

DadOSix

Full Access Member
Joined
May 20, 2020
Messages
834
Reaction score
477
Location
Cumberland, MD.
Are we talking about KJ, or KK? We are in the KK forum.... My 2012 KK looks like this....
You are right! My bad. Was going off of the post at the top on an 06 kj.
not sure on your kk. Maybe you want to make a new post since this one is mixed in the kj pictures.
 
Top