Search results

  1. R

    Rear upper control arm body mounting bolt just spins

    Did you find a better solution? I’ve got the same problem as you.
  2. R

    Upper Control Arm Bolt Hole

    Where do I find that nut? Mine just spins but I can’t find the nut anywhere
  3. R

    Lower control arm replacement

    So now I have a different issue. The bolt on the passenger side upper arm just spins part way out. Is there a way to get to the other side without cutting carpet?
  4. R

    Lower control arm replacement

    That worked. Thank you sir!
  5. R

    Lower control arm replacement

    I’m replacing rear upper and lower control arms, and on the passenger side, my muffler is blocking me from removing the body side bolt of the lower control arm. Any suggestions on how to get it out without removing the muffler?
  6. R

    When to torque bolts

    I have the Iron Rock Off-road control arm with a mount for the axle. I couldn’t find a 4 link like the JBA bolt on one, and desperately needed a new upper arm, so I got the IRO arm to have something a little more heavy duty than stock, and I wasn’t gonna waste my time with a cheap aftermarket...
  7. R

    When to torque bolts

    All my parts have finally arrived, so I can get to work this weekend. I’m gonna get a grease gun this weekend (assuming one of my friends will be able to help pick one up and deliver it to me) to put grease in the upper flex joint in the rear. Is there a style of grease gun that anyone has found...
  8. R

    Rear lower control arm bolts

    Amazon made a mistake and sent me my lower control arm bolt kits twice, leaving me with 8 bolts. Since I only need 4, I have 4 more I’m willing to part with. Amazon sells the bolts at $26 for 2 bolts. $40 shipped. Comes with 4 bolts and 4 nuts.
  9. R

    When to torque bolts

    Here’s hoping I can work on it this weekend. UPS delayed half my parts. So I have the rear upper, spark plugs, and lower arm bolts, but not the lower arms, sway bar links, or bushings.
  10. R

    When to torque bolts

    Thanks Tom! I appreciate your help once again. I’m getting ready to put in the Iron Rock Off-road WJ rear upper, just generic lowers for now (blew my budget on the upper cause it’s in much worse shape), new bolts for the lower arms, and quite a few new bushings. When I have a friend over to make...
  11. R

    When to torque bolts

    I’m prepping to do a semi large overhaul of suspension and steering, specifically replacing upper and lower control arms in the rear, sway bar links and bushings in front, steering rack bushings, coil isolators on both sides upfront, and spark plugs for good measure (I got some copper ones this...
  12. R

    Transmission cooler line leak temp fix

    I bought transmission cooler lines to do that to mine. Putting two clamps on each side. My understanding is the transmission cooler lines are low pressure and shouldn’t have a problem replacing them. I am by no means an expert though.
  13. R

    JBA Y-Link Extension

    That’s good to know. I’ll keep that in mind when I have enough money to put toward them. For now I need as inexpensive as I can go without getting complete garbage.
  14. R

    JBA Y-Link Extension

    Let us know how the alignment and pinion angle check goes. I’ll be interested in what they have to say about it as well. I’m looking at the Doberman racing ones as well, but not for a while. I can’t afford that much in new parts currently.
  15. R

    JBA Y-Link Extension

    What he messaged me when I was asking him questions about options for the rear setup was: Since he is also running a 2.5” lift, I figured I’d follow his example. I’m really looking forward to seeing how my truck handles with new rear control arms, upper and lower. Out of curiosity, are you...
  16. R

    Where to find front and rear 4.10 axles.

    I haven’t found any used ones or any 4cyl liberty’s in junk yards anywhere around me, but it looks like you can buy them from Rock Auto.
  17. R

    JBA Y-Link Extension

    Did you cut any off of the axle joint? wwdiesel recommended I cut off about an inch to get the correct pinion angle for a 2.5” lift. What lift do you have in your liberty?
  18. R

    JBA Y-Link Extension

    I just bought an iron rock arm for my liberty, so I’d love to hear your thoughts on it as well.
  19. R

    JBA Tri-Angulated Bolt on 4-link and JBA 1930S Exhaust Headers

    PM sent
  20. R

    trans cooler lines

    yeah, I looked it up already. It’s 3/8th inner diameter hose, so that size should be right. I am hopeful I can do this work next weekend. I started a new job thankfully, and so I may have money again soon. Coronavirus definitely wiped out my bank account.

Random media

Grand cherokee motor mounts at 16.5".
avatarlost
Is it coming from the heater 'sockets' ?
3806.jpg
11
IMG 2290
Hoces Rio Duraton 2
Snow December 2013
After Second Wash

Latest posts

Members online

Total: 298 (members: 2, guests: 296)
Top