Search results
-
Another KK lift
I used to be a MOD over on LOST for years as well , Im sure my handle is still floating around over there somewhere Used to like it more than here,but times have changed- tommudd
- Post #6
- Forum: Lift Kit Discussion
-
Survey on AT tires being used
Im glad some like the Kumho Road Ventures I ran a set on the 04 , one set on the 05 hated both sets We just OK at first, but with 12,000-15,000 or so, wet roads, snow etc they were terrible Before 30,000 both sets were toast/gone /used up Granted I do not take it easy on tires, but got...- tommudd
- Post #22
- Forum: Tires / Wheels
-
HOW OFTEN DO YOU CHANGE YOUR PCV VALVE?
all of mine get changed every 40,000 or so cheap and easy to do so why not- tommudd
- Post #4
- Forum: KK General Discussion
-
My Accidental Build
JBA headers will not do anything at all for you unless you sink a lot into the motor , not worth it Save up now for a real lift since you;; be needing it in a few months , Rustys , RRO, Rough Country are all bad way to lift for the long run- tommudd
- Post #5
- Forum: Members' Journals
-
Another KK lift
Pretty much have it there will need 2 3/8 inch bolts 2.25 inches long with washers and nuts to bolt down rear hockey pucks Never sure why anyone thinks there is a real difference between just highway driving and going off road I've always did upgraded suspension for highway driving foremost...- tommudd
- Post #2
- Forum: Lift Kit Discussion
-
Survey on AT tires being used
Not always true Ive seen top rated tires take a ton of weight and then some cheap recap yjay someone brought in take way less than a 1/4 ounce I have installed tires and managed tire stores ( for GOODYEAR, and major brands ) for many years- tommudd
- Post #18
- Forum: Tires / Wheels
-
Front top shock mount studs
I would replace the top mounts Could be a real pain in the butt if you have to remove them someday with just bolts in them Don't even ask what some idiot did and I had to try and remedy his problem- tommudd
- Post #4
- Forum: KJ General Discussion
-
2002 Renegade moisture/fog on inside of front glass. 221K miles
Heater core will do that , need to replace- tommudd
- Post #2
- Forum: KJ General Discussion
-
Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16
IF, you measured correctly and are at 21 inches then yes you do have 3 inches of lift stock KKs were 18 inches middle of hub to bottom of flare on level ground left side- tommudd
- Post #62
- Forum: Lift Kit Discussion
-
Wheel hub camber shims
Have ran over four and a half inches of lift on the 04 for over 120,000 miles No stupid shims needed at all Alignment was right on the money , as a matter of fact one set of Duratracs went well over 90,000 miles and wear was flat across Lots of so called alignment shops know diddly on aligning...- tommudd
- Post #9
- Forum: Lift Kit Discussion
-
Transmission Shift Improvement Kit
I installed one on my 04 back in 05 about 3 months after buying it brand new , always did good , no resistors back then to solder in or any other BS- tommudd
- Post #9
- Forum: KJ General Discussion
-
What did you do to your jeep today?
You never have to drop control arms to remove the front diff , huge waste of time- tommudd
- Post #23,877
- Forum: KJ General Discussion
-
Rain guards
Ive installed the stick on ones on all 3 of mine plus 4 or 5 others, different brands but they all stay on- tommudd
- Post #3
- Forum: KJ General Discussion
-
Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16
WONDER WHY I wasted my time ...................................LOL- tommudd
- Post #46
- Forum: Lift Kit Discussion
-
What did you do to your jeep today?
Wow tore all that out just for a rack R&R ? Well too late now- tommudd
- Post #23,872
- Forum: KJ General Discussion
-
Bilstein ome lift bushings and metal sleeves?
o rings are just there to keep some moisture out, Ive installed them both ways with no ill effects- tommudd
- Post #3
- Forum: Lift Kit Discussion
-
Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16
JBA included a bushing for some time, not sure about now Main thing for the bushing was to keep the boot compressed more I tested , among other things for JBA, on the 03 and 04 by running one side with bushing, one without, same results really in overall performance , wear, service etc MANY...- tommudd
- Post #30
- Forum: Lift Kit Discussion
-
Replacement halogen headlights
Yes MOD on there for the KJ site, well one of them, but will not sell anything on there- tommudd
- Post #27
- Forum: KJ General Discussion
-
Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16
Do you have the Teraflex bumpstops for the front, hockey pucks for the rear etc ?- tommudd
- Post #16
- Forum: Lift Kit Discussion
-
What should I need.
Yes to new WHEELs, rim is part of a wheel at least 2.5 inches of lift with the right size wheel and backspacing JUST SAY NO NO NO to any leveling or spacer lifts, bad ju ju Plus it does not matter at all if you never drive off road into your lawn Do it right with a full spring lift, OME...- tommudd
- Post #2
- Forum: Lift Kit Discussion
