Thoughts? OME lift Bilsteins falken wildpeaks 265/70/16

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

r00t2400

Member
Joined
Jan 1, 2023
Messages
60
Reaction score
25
Here is a clevis lift thread with some pictures.

Thanks, I was just reading another thread and noticed where you said a kk stock height is 18 inches. So if I’m sitting at 21
Dont I already have three inches of lift?
Here is a clevis lift thread with some pictures.

thanks. I was just looking at another thread where you were discussing kk stock height and said it’s 18 inches. I measured mine before I lifted it and it was at 19 I’m pretty sure. Am I already lifted 3 inches if I’m sitting at 21 all around?
 

Attachments

  • 11DBAE28-09F1-4DC1-8DB1-D069D6554FD4.png
    11DBAE28-09F1-4DC1-8DB1-D069D6554FD4.png
    655.9 KB · Views: 2

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
Thanks, I was just reading another thread and noticed where you said a kk stock height is 18 inches. So if I’m sitting at 21
Dont I already have three inches of lift?

thanks. I was just looking at another thread where you were discussing kk stock height and said it’s 18 inches. I measured mine before I lifted it and it was at 19 I’m pretty sure. Am I already lifted 3 inches if I’m sitting at 21 all around?
IF, you measured correctly and are at 21 inches then yes you do have 3 inches of lift
stock KKs were 18 inches middle of hub to bottom of flare on level ground left side
 

r00t2400

Member
Joined
Jan 1, 2023
Messages
60
Reaction score
25
IF, you measured correctly and are at 21 inches then yes you do have 3 inches of lift
stock KKs were 18 inches middle of hub to bottom of flare on level ground left side
Looking at it again and I’m thinking that because my wheels are pushed out past the flare a bit the measuring tape isn’t straight up and down and that’s where the extra half inch is coming from. So yeah operator error it seems.
 

Latest posts

Members online

No members online now.
Top