Search results

  1. D

    Weird Electrical issues

    That is partly the reason why i never fixed it the radio,wipers, horn, and turn signals work normally when driving, and never fear my jeep is pretty well a trail machine that i daily so i havent had carpet for 4 years. And before i did the SAS i had thought i fixed the problem by cleaning a...
  2. D

    Weird Electrical issues

    Hey there pals its been some time since i was on here last, i an electrical issue where when i turn off my jeep the radio OR the wipers will stay on but only one or the other. Also when i lock/unlock the jeep my 4 ways dont flash and the horn dosent beep, this issue came when i floated it across...
  3. D

    Electronics issues.

    Ok your probably right, im friends with some mechanics who could get there hands on it to double check that, that's the problem, thanks !
  4. D

    Electronics issues.

    sorry its an 03 rocky mountain i haven't tried turning it upside down and will in the morning.
  5. D

    Electronics issues.

    I mean the steering wheel lock up when the jeep is off, i was just driving through it no stopping my battery light came on, but went away after i shut it down and started it back up upon inspection. I haven't checked the relay box, and do you mean like a cable unplugged at the firewall ? like a...
  6. D

    Electronics issues.

    Hey guys i was out in the woods recently on a club run and wadded through some water, the water was up to the bottom of my headlights in some spots. After i got home and shut the jeep down i noticed that the jeep turned the radio on with the key out and the ignition in the off position. So i...
  7. D

    2006 rear flares on a 2003 ?

    Hey a friend is letting me borrow his rear fender flares from his 06 for my Inspection. My question is will 06 flares fit on a 03 ? I know the fronts are different but are the rears the same ? Thanks in advance !
  8. D

    Libby wont start :(

    I'll have to try these tips tomorrow thanks for sharing them, i doubt its the battery though, as i picked up a second one at the same time for a dual battery set up, and tried changing the battery, to no improvement.
  9. D

    Libby wont start :(

    Im unsure about the volts as i don't have a multi-meter, but it was bought brand new and a day later it wouldn't even crank. It just started raining and haven't had a chance to crawl under her to take a look, i have a feeling it might just be the solenoid as i hear a single click when i try and...
  10. D

    Libby wont start :(

    Hey guys my jeep was running fine the other day after changing the battery out , started and stopped just fine. Then when to start her up today and now she wont crank over, tried swapping the battery/boosting it but no luck, the fuses seem fine. And the Alternator seems good as well, so anyone...
  11. D

    Chuckin the daystar !

    Sweet !!!
  12. D

    Chuckin the daystar !

    Really appreciate it, i cant wait to get my lift installed concerting I'm probably sitting around stock, after this lift is installed would you recommend putting in JBA UCA's with some clevis's to make a 3.5 inch lift down the road ?
  13. D

    Chuckin the daystar !

    Here's my bush bar, I always call it a bumper, even though I know its not. According to jba the 927 will keep 1.5 lift with 150lbs extra.
  14. D

    Chuckin the daystar !

    I thought that the springs are supposed to add 1½ inches of lift ? I must have been mistaken any idea how I could build a 3 inch lift to support my winch bumper ? I have around 125 pounds of winch/bumper
  15. D

    Chuckin the daystar !

    Tired of my daystar suspension spacers killing my springs, so im wondering if i combine a OME2927 hd 11/2 lift spring (i have a winch) with a rusty's 2 inch spacer would that work for a 3.5 inch front end lift ? I would like to keep the puck in the rear with maybe new springs, seeing as the puck...
  16. D

    Improveing my lift

    OK I got the general idea, thanks for all your help guys, I got the thought of combining the spacer and coils from somone with a 2 inch BDS coil with a 2 inch daystar spacer, he might have done some other stuff to male it work.
  17. D

    Improveing my lift

    Thanks this helpped alot I wasent offended just confused by tom Mudd :)
  18. D

    Improveing my lift

    I under stood you, I got the daystar as a gift since I'm paying for school, I didn't understand the Ashton kutcher thing.
  19. D

    Improveing my lift

    Excuse me ?
  20. D

    Improveing my lift

    Hello this is my first post here ! I have a 2.5 inch Daystar suspension lift, stock coils and struts, I am looking to add some crd/HD springs front and rear with some new UCA's. This being because of my winch/brush bar adding 120 pounds compressing my coils. I would also like to get some...

Latest posts

Members online

Top