Search results

  1. KingKJ

    What did you do to your jeep today?

    Installed my MBRP exhaust today! (clip of how it sounds)
  2. KingKJ

    lockers

    yeah, theoretically the front end would be locked the least as well as locked/unlocked at a full stop, I'm just making sure it won't damage anything while locked.
  3. KingKJ

    lockers

    https://store.arbusa.com/air-locker-differential-dana-30-27-spl-3-73-up-rd100/ I just found this locker for sale at arb for jeep liberty, this should be something that works for the liberty, but is it fine to have a fully locking differential for the front differential? Or is it something I...
  4. KingKJ

    lockers

    would anything the fits the dana 30 fit even if I had a different gear ratio in there? I am planning on finding some 4.10 gears for the front
  5. KingKJ

    lockers

    I'm looking for lockers for front and rear for my liberty and am wondering where I can buy them and will they be compatible if I regear to 4.10 Does anyone have some links to where I can buy them or some estimated costs? I'd like to keep it as budget friendly as possible but also don't want to...
  6. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    Ok, I don't think rust is a huge worry, suspension tends to do that because it's so exposed
  7. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    is any one of those going to be better value/quality than the others, or are they all about the same?
  8. KingKJ

    Lift pics and spec thread

    not entirely sure, but I'm pretty sure that it is the renegade trim, it had the factory fog lamps, the fake bolt fenders, and the 05 roof rails, just lost the bumper/fog lamps and swapped the roof rails so the trim piece fits
  9. KingKJ

    Lift pics and spec thread

    90% sure it is on a 2.5 inch daystar lift that was installed way too many miles ago(probably from stock) but as of right now it is sitting at 20.5 inches in the front and 20 and 3/4 inches in the rear tires are 255/75 r16
  10. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    Ok, I'm already planning on replacing the bushings while I'm working on suspension, though because I'm going with the 790s is there any major difference? I know they are designed for more weight, which I'm adding a metal bumper and winch to the front.
  11. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    Oh I must've misreading the listing, it thought they wanted 449 per uca I'm pretty sure jba uca is supposed to allow for a proper alignment and who can say no to powder coated red. But I'm pretty sure jba is the choice for.most ppl just because of reputation and the fact that it gets the...
  12. KingKJ

    What did you do to your jeep today?

    would you happen to have a link? I can't seem to find it
  13. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    so is that with my coil spacer to get it to be a 3 inch lift or without?
  14. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    to fix the rear being lower all I'd have to do is stack an isolator or 2 in the back right?
  15. KingKJ

    What did you do to your jeep today?

    Sweet! If you don't mind though, I'm curious about the lift you have installed, do you happen to know how much lift you got out of it, I'm trying to figure out mine and your is pretty much what I'm installing, just different shocks and I'm trying to figure out if the 790's are overkill or if...
  16. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    the spacers aren't to deal with alignment and stuff, it is just to increase the lift to 3 inches, all the other parts are being put in place in order to do that.
  17. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    I've been told by people on this forum that's the lift amount? I'm putting on a winch and steel bumper so that's why I'm going with the 790 so it should match the rear and I wont have to mess with coil spacers/isolators to level it?
  18. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    also is there any real benefit to the UCAs from RRO because as of right now when I checked you buy a single RRO UCA for the price of a set of JBA UCAs, both have removable ball joins and greaseable parts, but RRO is 2x the price!
  19. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    I see, I considered dropping the NAPA and IRO parts but because I am planning on putting the spacers to make it 3 inch lift I figured it would help keep everything in alignment with the larger lift, get more articulation, and not wear out parts as fast.
  20. KingKJ

    What did you do to your jeep today?

    Despite the weather we got in the last couple days, went out and offroaded

Random media

Εικόνα 0055
but the fun an $ is gona start this summer :)
get attachment
11
Jerrycan mount 5
7/17/11
DSC00448
Lost up at Bartlette Lake
IMG00003 20090404 1013

Latest posts

Members online

Total: 514 (members: 3, guests: 511)
Top