I think the Teraflex stops are two inches longer. The part number is down there in my sig. You will need to call them as they are not listed on their website. 801.713.3314 I can’t remember exactly what I paid, maybe $26 for the pair.
I’m not entirely clear on your situation, is the LCA too low? Or is the clevis off to the side? I had a jack holding up the control arms when I did my lift and that was how I adjusted the position.
You can find a Parts Fiche and Service Manuals here:
http://www.colorado4wheel.com/manuals/Jeep/KJ/
Here you can enter your VIN and get the Build Sheet:
http://fcacommunity.force.com/RAM/s/equipment-listing
You can move the coolant tank out of the way without disconnecting the hoses. The manual advises against premium gasoline. Regular or Mid Grade depending on conditions.
Welcome to the neighborhood. Spacer lifts are bad for the cv’s up front, springs and shocks are the way to go. Measure from the center of the wheel to the underside of the fender flare, it should be 19”. It’s very likely the springs are tired by now.
We have some good threads on lifts here...
Parts numbers in my sig. Check out our moderator @tommudd ‘s posts in the various lift threads here. He explains in detail what works and what doesn’t.
Moog Problem Solver greasable ball joints for the lower front. You might want to consider replacing the upper control arms on front with the JBA (Jeepin’ By Al) extended travel arms.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.