I’m wanting to get front tow hooks for my ‘02 KJ and am having a hard time finding any. I don’t know if it’s the fact that I’m in Canada that I can’t seem to find any or if I’m just not looking in the right spots. Any help/advice would be greatly appreciated. Thanks in advance!
Front tow hooks
- Thread starter KJGremlin
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
renegade 04
Full Access Member
Did you look in junk yards yet? Those would be the best place to go.
duderz7
Full Access Member
Some have made their own using 1 1/4 inch hitches and put D ring on it, might be worth a look
Gary's auto wreckers (jeep only) is in Maple Ridge. Last time I was there they had a stack of KJ's there, bring tools to remove em.
mercdudecbr600
Full Access Member
- Joined
- Oct 3, 2018
- Messages
- 290
- Reaction score
- 72
You can buy new ones from Jeep for about $150 usd. Check eBay. Those ones come with a “m” shaped bolt that doesn’t require you to undo all the fasteners for the front bumper and will save you about 2 hours of monkeying with the front clip, and having to get a special riveter, and plastic rivets, and just a general dislike of Jeep engineering. I guess what I’m saying is, if time is money for you just get the new and more expensive hooks - might cost you an extra 60 bucks but will save you lotsa time/hassle
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Check eBay. I got a set of OEM ones from there but they didn't have the funky mounting bolt that is shaped like an M so they are still sitting on the garage floor. Any ideas how I can get those bolts would be helpful.
mercdudecbr600
Full Access Member
- Joined
- Oct 3, 2018
- Messages
- 290
- Reaction score
- 72
Asked the same question and the answer is you can’t. Just take the front clip off
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Amazon has a bunch of bull/push bars starting at $166.00
Was thinking of getting one and using it for a emergency tow are. Thought could weld some some attachments on bottom for attaching d-ring too
Would that be strong enough for casual use?
Was thinking of getting one and using it for a emergency tow are. Thought could weld some some attachments on bottom for attaching d-ring too
Would that be strong enough for casual use?
No, that wouldn't be anywhere near strong enough. Best bet for a brush guard you can tow with is the JBA matrix one.
https://jeepinbyal.com/jeep-liberty-kj-matrix-brush-guard.html
https://jeepinbyal.com/jeep-liberty-kj-matrix-brush-guard.html
