hey all, I’m a TJ owner that got scammed into buying a brand new from factory NSG370 they listed for a TJ, but it is a 2WD version and am having no luck selling it. Looks like you have to be a member to post on the marketplace here, and was hoping someone can help me out either to post it or put me in the right direction. I currently have it posted on EBay and fb marketplace but am having no luck finding a buyer. Thank you!
Need help selling a NSG370
- Thread starter Ascho7
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Can't you swap the tail housing or use it with a separate transfer box?
I doubt many people on here will want a 2wd box, the NSG was only used on the export manual 2.8CRDs as far as I know and then in 4x4 arrangement.
It's normally found in Mercedes cars, you might have luck on a Mercedes forum or a hotrod forum, it's a strong box and would be nice behind a powerful engine.
I doubt many people on here will want a 2wd box, the NSG was only used on the export manual 2.8CRDs as far as I know and then in 4x4 arrangement.
It's normally found in Mercedes cars, you might have luck on a Mercedes forum or a hotrod forum, it's a strong box and would be nice behind a powerful engine.
Last edited:
JMichael2006
Member
- Joined
- Oct 11, 2021
- Messages
- 39
- Reaction score
- 46
I found the rear housing for it on E-Bay for $260. You could just rebuild it as a 4x4 unit.
JMichael2006
Member
- Joined
- Oct 11, 2021
- Messages
- 39
- Reaction score
- 46
Unbolt the output flange in the tail housing, I believe you'll find the setup for 4x4.
KJ bellhousing. Unfortunately that would mean using the TJ front and back case halves and putting everything back together and then I have a worthless tj internal and kj case. Unless you’re asking because you’re interested
