Project to divert KK coil to KJ

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KJowner

Full Access Member
Joined
Oct 20, 2022
Messages
1,478
Reaction score
851
Location
Uk
Hopefully good quality, Denso gear is usually decent. Unfortunately the Chinese are buying old names and making cheap junk to go in the box, I got caught with a Crossland filter.
 

ikuo78

Full Access Member
Joined
Mar 13, 2024
Messages
189
Reaction score
202
Location
Japan
Hopefully good quality, Denso gear is usually decent. Unfortunately the Chinese are buying old names and making cheap junk to go in the box, I got caught with a Crossland filter.
surely.
I also end up buying low-quality products without checking.
Manufacturers with IR on their HP are generally fine.
 

ikuo78

Full Access Member
Joined
Mar 13, 2024
Messages
189
Reaction score
202
Location
Japan
I replaced the serpentine belt because I smelled rubber from the engine compartment.
The belt had many cracks.
It was a different part number than the service manual.
For the 2003 model, the service manual lists only one belt option.
Maybe someone replaced it?
I don't know the correct length, but the belt is 2225mm, and the tensioner is working and working properly at the moment.

You must be registered for see images attach

You must be registered for see images attach
 
Top