****** computer re flash?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

hadtomer

Full Access Member
Joined
Oct 16, 2016
Messages
181
Reaction score
31
Location
Israel
Hello-

Fitted larger tires today and met a fellow libby owner at the tire shop.

Much t my surprise he told me about some sort of ****** computer re flash that can take into account larger tires, change the shift pattern and such.

did anyone here hear about something like that?
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,190
Reaction score
1,836
Location
B.C. Canada
It's actually a calibration done by any dealer that knows what they are doing w/ a Star Scan.
What size tires did you install?
From post 19-
Having your speedo calibrated for larger tires is not only to correct the speedo reading,it greatly effects how the auto trans shifts.If the speedo is programmed for smaller tires(even if speedo is off by 5% which is normal) and you have larger tires,by at least 1" or more in total diameter then stock, it will confuse the trans and make it shift wrong which makes you mad and give it more gas to kick down which makes it shift more which creates more heat which more heat causes early trans failure.
Link to above thread^: http://www.jeepkj.com/forum/f200/tire-size-change-39894/
 

rjkj2005

Full Access Member
Joined
Feb 25, 2016
Messages
380
Reaction score
0
Location
US
I've been running 265/75/16 with factory 3.73's for a while with the factory transmission settings. No issues except that the speedometer is off. As far as shift point changing. Why. With the larger tires you need to stay in gear longer. Right now it up shifts still at the factory settings of 45 mph. Which means I'm going almost 50mph. Now when I'm in a 45 zone I'm showing 40 mph on the speedometer and in the correct 3rd gear. Which is a better rpm than 4th with the larger tires. If I recalibrate that would mean that it will still up shift at 45 mph which would be the actual speed with the larger tires. Then the transmission would start to yo-yo between gears till I got to 50 mph +
Plus the 5 dealers I've talked to will only increase tire size in the PCM to 245/70/16s. The largest tire size jeep says will go on a factory hight KJ. At least around my area.

Sent from my XT1585 using Tapatalk
 

hadtomer

Full Access Member
Joined
Oct 16, 2016
Messages
181
Reaction score
31
Location
Israel
I am running 4.10 gears so i guess it does not really matter. i was running 245/75R16 and I took a set of 235/85R16 for a spin. I don't think they will require 4.56 gears- just a bit of fettling.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
I've been running 265/75/16 with factory 3.73's for a while with the factory transmission settings. No issues except that the speedometer is off. As far as shift point changing. Why. With the larger tires you need to stay in gear longer. Right now it up shifts still at the factory settings of 45 mph. Which means I'm going almost 50mph. Now when I'm in a 45 zone I'm showing 40 mph on the speedometer and in the correct 3rd gear. Which is a better rpm than 4th with the larger tires. If I recalibrate that would mean that it will still up shift at 45 mph which would be the actual speed with the larger tires. Then the transmission would start to yo-yo between gears till I got to 50 mph +
Plus the 5 dealers I've talked to will only increase tire size in the PCM to 245/70/16s. The largest tire size jeep says will go on a factory hight KJ. At least around my area.

Sent from my XT1585 using Tapatalk

They can do more, Jeep dealers have done 5 for me to 265-75-16s
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
I am running 4.10 gears so i guess it does not really matter. i was running 245/75R16 and I took a set of 235/85R16 for a spin. I don't think they will require 4.56 gears- just a bit of fettling.

Does matter and makes a difference
You must live in a flat area I always wanted 4.56s with my 32s
the 265-70-16s on my DD are perfect with 4.10s
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio

rjkj2005

Full Access Member
Joined
Feb 25, 2016
Messages
380
Reaction score
0
Location
US
They can do more, Jeep dealers have done 5 for me to 265-75-16s
Yes I know. Just the dealerships around me won't do it for more.

Sent from my XT1585 using Tapatalk
 

rjkj2005

Full Access Member
Joined
Feb 25, 2016
Messages
380
Reaction score
0
Location
US
This and regearing,....people will argue for hours that it is not needed, that is until they ride in one that has had the reclaibration and regearing done
Does regearing make a difference. Sure. There's no doubt it would make a difference. But is it "needed"? Is it necessary? No. Would I do it if I had the extra cash. Probably not. I spend 90% of my time in town. OD off up to 55. It works fine for my area.

Sent from my XT1585 using Tapatalk
 

nbas

Full Access Member
Joined
Jul 21, 2017
Messages
164
Reaction score
88
Location
Greece
How much do they typically charge for the transmission re-flash?

I went to the Dealership, explained what I wanted to do to the mechanic. They did not know what to charge at first and finally I paid something like 10-15Euro's...
I see in your signature that you have re-geared (in Greece since I see a Greek name?). Where did you do it (if in Greece) and how much it cost? Any issues since?
 
Last edited:

04Liberty

Full Access Member
Joined
Sep 14, 2006
Messages
1,303
Reaction score
89
Location
MD
All it is, is changing the pinion factor in the computer.
 

Latest posts

Top