MiceElf
New Member
I drug her to my mechanic to get the ****** replaced. Best MPG I've gotten so far!
I should have her back on Saturday!
I should have her back on Saturday!
What did you do to your jeep today?
- Thread starter TheQ
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ya I'm use to it..Lifted skids, recovery gear etc, mine weighs in around 5000lbs.
ha ha..
58534[/ATTACH]"]
You must be registered for see images attach
Welcome from another BC'er. :gr_grin:
Attachments
jharrisliberty
Full Access Member
Yeah I can get some pics when I finish. Just so you know the way I am going to be doing this would require the removal of the spare tire and tire carrier.
jharrisliberty
Full Access Member
I am curious as to which of the yards you went to in Denver. As I am in this area as well and there are about three yards here that constantly have Liberty's. One of them has the best prices in town and the other two charge about double. Although I have found plenty in all three of them.
20Liberty03
New Member
Just put rings and bearings in it, maybe it will get better
Went to the new O'Reilly's that just opened today close by , only vehicle there when I pulled in. All 4 employees who were working there went to the window looking out. Then one guy walked over and said " Can you make my liberty look like that ?"
Sure thing ! Now I have a lift to do when he gets his taxes back and orders from the list of parts I gave him . Plus he said anything I want he can get it for me at his cost!
Almost forgot what I went in to buy !
Sure thing ! Now I have a lift to do when he gets his taxes back and orders from the list of parts I gave him . Plus he said anything I want he can get it for me at his cost!
Almost forgot what I went in to buy !
Gyro
Full Access Member
The 07 rolled over 90,000kms today.
Found another liberty in my area on kijiji(have not bought it YET).
03 Burgundy w/55,000kms.
I'm scared to inquire about it,do I really need 3 Libertys.
Could always sell the 06 Renegade it's getting on 150,000kms.:Insane:
Gyro
Found another liberty in my area on kijiji(have not bought it YET).
03 Burgundy w/55,000kms.
I'm scared to inquire about it,do I really need 3 Libertys.
Could always sell the 06 Renegade it's getting on 150,000kms.:Insane:
Gyro
Sure you do, I had 4 at one time, down to 2 and looking ...looking hard :happy175:
my shed came. and my shed left.
they couldn't get it off the truck.
and the broke it in attempting to do so.
I am jack's thorough unhappiness. someone fscked up and now my $10k shed is broke.
Supposedly it's coming tomorrow, they'll get it off, and they'll fix it on site.
they couldn't get it off the truck.
and the broke it in attempting to do so.
I am jack's thorough unhappiness. someone fscked up and now my $10k shed is broke.
Supposedly it's coming tomorrow, they'll get it off, and they'll fix it on site.
I just want the bumper!
link: https://vancouver.craigslist.ca/pml/cto/6001421442.html
Coquitlam BC..hmmm..I guess $8800 is too much to pay for an ARB....:gr_grin:
Anyone we know? I wonder if he still has the OEM bumper..hmmm..
Should I contact him? Probably would just would piss him off :icon_razz: LOL..
link: https://vancouver.craigslist.ca/pml/cto/6001421442.html
Coquitlam BC..hmmm..I guess $8800 is too much to pay for an ARB....:gr_grin:
Anyone we know? I wonder if he still has the OEM bumper..hmmm..
Should I contact him? Probably would just would piss him off :icon_razz: LOL..
$&^>€ %^¥@!
Been a helluva week. Prepping for my JBA lift, I went to pound the pinch weld. Got the Jeep up on jackstands, driver side tire off and on to the passenger side.
Who ever put the tires on last had an impact wrench set to kiss-my-backside. Or you're-number-one... not using the index finger standard. Rounded 2 lugnuts and a boat load of $ later and a destroyed rim, I was back in business.
I found that using the heat gun and vice clamps over two pieces of wood to reset the factory mold worked best. Decided not to follow that on the second one and worked my way into a real mess. Recovered, but time costly... and really, still pretty ugly, though functional.
I decided to go with a smaller tire in order to widen the stance. I plan on putting a decent amount of weight on the roof racks with a Tepui Roof Top Tent, so I put Spidertrax spacers on to widen the stance. I'm thinking if a 2.5" will get me a 31" 245x75/16 set (math actually works out to 30.5" - 245x75/2540x2+16=30.5. The formula works all around. The 16 portion is the rim size. Substitute any combo set for your height), then 245x70 16's at 29.5" should work with the 1.5" spacer. (31-1.5=29.5).
The spacers went on in about 15 minutes. Would have been faster but I found that I have 3 different lugnut sizes (shaking my da*n head).
New rims and tires, with new lug nuts were ordered today - Presidents Day sales! - so I'll have that PITA rectified soon.
Lift kit should be here Wed or Thurs... chomping at the bit.
Been a helluva week. Prepping for my JBA lift, I went to pound the pinch weld. Got the Jeep up on jackstands, driver side tire off and on to the passenger side.
Who ever put the tires on last had an impact wrench set to kiss-my-backside. Or you're-number-one... not using the index finger standard. Rounded 2 lugnuts and a boat load of $ later and a destroyed rim, I was back in business.
I found that using the heat gun and vice clamps over two pieces of wood to reset the factory mold worked best. Decided not to follow that on the second one and worked my way into a real mess. Recovered, but time costly... and really, still pretty ugly, though functional.
I decided to go with a smaller tire in order to widen the stance. I plan on putting a decent amount of weight on the roof racks with a Tepui Roof Top Tent, so I put Spidertrax spacers on to widen the stance. I'm thinking if a 2.5" will get me a 31" 245x75/16 set (math actually works out to 30.5" - 245x75/2540x2+16=30.5. The formula works all around. The 16 portion is the rim size. Substitute any combo set for your height), then 245x70 16's at 29.5" should work with the 1.5" spacer. (31-1.5=29.5).
The spacers went on in about 15 minutes. Would have been faster but I found that I have 3 different lugnut sizes (shaking my da*n head).
New rims and tires, with new lug nuts were ordered today - Presidents Day sales! - so I'll have that PITA rectified soon.
Lift kit should be here Wed or Thurs... chomping at the bit.
i'm sure a conversation will be had with the shop about this when it's all over. I have a good friend supervising the delivery tomorrow. he'll watch dog the repairs. I already told the shop, his word is law on site; if he don't like it I don't like it.
CzarKJ
Full Access Member
Gave the jeep a high pressure bath yesterday. Was going to remount my skids but the driveway is full ice and I didn't feel like laying on it quite yet.
uss2defiant
Full Access Member
Pictures sota?
If you do let him know about the JBA adjustable struts if he really wants the best lift out for the liberty.
