What did you do to your jeep today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Aceofspades

Full Access Member
Joined
Jan 24, 2017
Messages
803
Reaction score
108
Location
Buffalo
Anyone have a brand or source for a front drive shaft that won’t start twerking over 55mph?
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,191
Reaction score
1,836
Location
B.C. Canada
Clear the code prof and see how long or if it comes back. At least it is a very small leak.
Know anyone with a smoke machine?
 

profdlp

Fired
Joined
May 21, 2013
Messages
5,836
Reaction score
1,807
Location
Westlake, Ohio
Clear the code prof and see how long or if it comes back. At least it is a very small leak.
I plan to tomorrow., then go looking around for holes. I think that stinking chipmunk may be out for revenge since I got the pest-proof bird feeder and shut down his all-you-can-eat buffet. Probably took a chomp out of a hose somewhere. :mad:

Know anyone with a smoke machine?
I had a friend with a weird device that he used to smoke this very unusual-smelling "tobacco" out of. You could see a lot of smoke going through that thing. Big Pink Floyd fan as I recall. One night he went out for Taco Bell and never came back.
 

Leeann

Full Access Member
Joined
Mar 9, 2013
Messages
2,441
Reaction score
255
Location
Maryland
Worked on my husband's cousin's '07 Liberty yesterday - the low pressure switch had gone bad and he was a little low on refrigerant.

Today, I need to replace spark plugs on mine.
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,401
Reaction score
1,262
Location
NJ
I ordered a new CV joint for the front driveshaft. That should be here tomorrow. It will be done this week.

from driveshaftparts.com?
if so, here's an important tip:
it only goes on one way correctly, for the caps to fit on it properly.
do it wrong and manage to actually get it installed with any kind of force (namely tapping with a hammer) and you'll pop the out of the end, which will result in the end of the shaft getting chewed up, ruining it. then you'll have to order another boot/cover kit, and weld the joint to the shaft.

don't ask me how I know all this.
 

ltd02

Comfortably numb
KJ Supporting Member
Joined
Aug 15, 2014
Messages
2,719
Reaction score
246
Location
North Central Maryland
I had a friend with a weird device that he used to smoke this very unusual-smelling "tobacco" out of. You could see a lot of smoke going through that thing. Big Pink Floyd fan as I recall. One night he went out for Taco Bell and never came back.

I once woke up with a Taco bell hangover covered with Diablo sauce packets. That's funny since I don't remember you... :rolleyes:

Just find someone who vapes.

I was driving a newer Subaru the other day and it had a button next to the touch screen labeled Apps. I kept pushing it but no chicken wings came out. Guess it was broken. Anyone know of a recall?

Oh, back on topic, drove it to work and back today. Air conditioning is really good at work so "the man" got a free day from me.
 

CherokeeLiberty

Full Access Member
Joined
Nov 14, 2018
Messages
572
Reaction score
858
Location
Northern MN
from driveshaftparts.com?
if so, here's an important tip:
it only goes on one way correctly, for the caps to fit on it properly.
do it wrong and manage to actually get it installed with any kind of force (namely tapping with a hammer) and you'll pop the out of the end, which will result in the end of the shaft getting chewed up, ruining it. then you'll have to order another boot/cover kit, and weld the joint to the shaft.

don't ask me how I know all this.
Yes, it's froms them. Does it come with grease or do I need to get some? If so, what kind?
 

CherokeeLiberty

Full Access Member
Joined
Nov 14, 2018
Messages
572
Reaction score
858
Location
Northern MN
That's a sexy KJ.....


FedEx was early this morning. I just about tripped over the CV joint taking the dog outside. There was no grease included. I called Driveshaft Parts, and they're sending one up. I'm hoping it is here just as early on Wednesday.
 

JasonJ

Full Access Member
Joined
Jul 8, 2013
Messages
1,521
Reaction score
53
Location
Michigan
You must be registered for see images attach

You must be registered for see images attach


Soo. I need to modify my lift kit a bit...

Those the Cooper AT3's? Those moabs must be spaced out a bit, yeah? The tires look a lot larger than what is listed in our sig. Getting ready for new tires on moabs myself, so that's why I ask...
 

Aceofspades

Full Access Member
Joined
Jan 24, 2017
Messages
803
Reaction score
108
Location
Buffalo
Those the Cooper AT3's? Those moabs must be spaced out a bit, yeah? The tires look a lot larger than what is listed in our sig. Getting ready for new tires on moabs myself, so that's why I ask...
Yea it’s completely different set up.
I been a cooper fan for many years and been running the at3s and the newer version on both jeeps in a 245 series with 1.5” spidertrax spacers

I found these Moabs wrapped in Maxxis Razr M/T tires sized at 265/75/16

I feel they are a smidge tall for the front oddly enough. The rear bumpstop hits the double stack hockey pucks before any fender damage ( I hope ) from a quick jack test

The front I’m using .25” clevis spacer and the .25” top plate spacer.
I might have to add another .25” clevis ring and figure out how to get the front bumper area not to rub when turning.

I’ll be using the stock wheels for winter if I can get these wheels to run nicely now.
 

Jeremy-WI

Full Access Member
Joined
May 20, 2017
Messages
409
Reaction score
200
Location
Home
I put some Monroe econo-matic coil overs in the front over the weekend, wasn't much fun with rusted up upper balljoints. I have new rear springs coming so I can put those on next weekend. I might get yelled at for getting the monroes but they are much better than the stock ones or what was left of them
 

Members online

No members online now.
Top