What did you do to your jeep today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

duderz7

Full Access Member
Joined
Jan 20, 2016
Messages
1,504
Reaction score
1,260
Location
Weiser, ID
I've been slowly disassembling the front end to get the new diff and other parts in. Went ahead and dropped a nut off upper control arm directly into the "frame rail". Why, you might ask? Because things were going too smoothly and I wanted to do something completely aggravating.
After spending way too much time sticking a variety of magnets and wires into "frame" holes trying to fish this nut out I discovered it's a stacked box section. The nut had found its way into the lower one, of course. The only access hole was too small for the nut to pass through and I couldn't get a hold of it anyway. I could see it with a type of scope (white device) that hooks up to the cell phone. So off came the bumper and I was able to get it from the front with a length of 1/4" icemaker tubing with a bicycle spoke magnet taped on the end. And my son shining a light into hole that was too small. After igot it out and started reassembly I realized I was missing the lower bolts on grill support and ironically found the exact same nut I just fished out in my spare hardware bins. Oh well still glad to not have a nut in the frame.
You must be registered for see images attach
You must be registered for see images attach
 

Red Dog 6436

New Member
KJ Supporting Member
Joined
Sep 18, 2021
Messages
10
Reaction score
12
Location
Northern Iowa
Attempted to remove the front bumper so I can install my OEM two hooks. Looked at and followed almost every How-To and video I could find over the course of the past year.

After an unsuccessful hour of trying to find anything on the 2002 KJ fronts I re-installed everything I had removed and called it a day. Will have more time next weekend to tackle it until I figure it out.
 

turblediesel

memberable
Joined
May 31, 2015
Messages
3,421
Reaction score
1,158
Location
Alaska
I beat my PB of 43.5mpg (Imperial gallons) on my commute to work. I was determined to squeak 44, was traveling south with no headwind, a very light 3/4 mph northerly tail wind and to my surprise clocked 47mpg!! This is in a 05 CRD btw.

My '05 CRD personal best was 25mpg (US gallons) on one peppy tank of fuel. Normal was 23mpg summertime and 19mpg wintertime. After the F36 (F26?) reprogram all I got was 19 summer and 14 winter.
 

Doing10to20

Full Access Member
Joined
Apr 23, 2020
Messages
297
Reaction score
482
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach

New river to seven springs to cave creek bout 50 to 60 offroad miles up and down mountains and plenty of washes and rock gardens on the way up...finally got the kj just about perfect just need the dtt up front and it's as it should be
You must be registered for see images attach
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,397
Reaction score
1,251
Location
NJ
anyone know the quick disconnect size for the fuel line off the top of their head? 3/8" and 5/16" are the two common ones that keep coming up for chryslers.
 

Johnny O

Just hangin' out.
Joined
Apr 29, 2021
Messages
2,525
Reaction score
3,478
Location
Bellevue NE
Beautiful weather today! It's a Nebraska home game day, so all the crowds are down in Lincoln...Me and Bert are just cruising around making pit stops at all the pubs that serve my fake beer...perhaps we will find a new co-pilot... ROFL
You must be registered for see images attach
 

turblediesel

memberable
Joined
May 31, 2015
Messages
3,421
Reaction score
1,158
Location
Alaska
What is the F3## reprogamme? Is this the same as a remap?
F37 reprogramme was a recall done on US 2.8 CRDs to reduce torque, (and fuel mileage). Lots of CRDs were developing a "shudder" on acceleration which destroyed torque converters.
 

archiacpenguin

New Member
Joined
Feb 1, 2022
Messages
19
Reaction score
8
This should be a great thread that we can keep going. That way we can all keep up with the small day to day tinkering and give some ideas to those looking to do something! Pics are strongly encouraged!!! (Cheers)
 

archiacpenguin

New Member
Joined
Feb 1, 2022
Messages
19
Reaction score
8
JBA stubby headers. Next probably going to be out of commission for a bit while the forged internals are being made. I was pulling the heads to put ported ones on and was like it's all right there I might as well.
 

JRB

Full Access Member
Joined
May 27, 2021
Messages
263
Reaction score
263
Location
WPB, Florida
I never wanted to be a jack of all trades until I realized big companies charge $100-$200 an hour for messing everything up where I live. So this isn't exactly what I did to my jeep today, but my jeep took me here to work and the problem still applies to vehicles, which is why I wanted to share for those that haven't seen it happen.

You must be registered for see images attach


You can see how swollen this blue hose is, the inner jacket broke open and was not letting water run though, it just filled up the outer liner. The same can happen with brake lines on vehicles where the inner springs a leak and it all runs inbetween the jackets but never leaks externally, just acts like a reservoir.

When I was leaving the community a big ol lizard was taking its time crossing the road, figured I'd take some pics while waiting.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

Johnny O

Just hangin' out.
Joined
Apr 29, 2021
Messages
2,525
Reaction score
3,478
Location
Bellevue NE
I never wanted to be a jack of all trades until I realized big companies charge $100-$200 an hour for messing everything up where I live. So this isn't exactly what I did to my jeep today, but my jeep took me here to work and the problem still applies to vehicles, which is why I wanted to share for those that haven't seen it happen.

You must be registered for see images attach


You can see how swollen this blue hose is, the inner jacket broke open and was not letting water run though, it just filled up the outer liner. The same can happen with brake lines on vehicles where the inner springs a leak and it all runs inbetween the jackets but never leaks externally, just acts like a reservoir.

When I was leaving the community a big ol lizard was taking its time crossing the road, figured I'd take some pics while waiting.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
Big lizard in my backyard
Can't afford to feed him anymore
Big lizard in my backyard
Bustin' down my neighbor's door
I bought a big lizard, only a dollar-fifty
Well, that's pretty neat, yeah, it's f-n' nifty
But I just can't afford to feed it
And you should see the way it sh*ts
 

EagleKJ

Lurking member
Joined
May 22, 2022
Messages
42
Reaction score
79
Location
Toledo, Ohio
Big lizard in my backyard
Can't afford to feed him anymore
Big lizard in my backyard
Bustin' down my neighbor's door
I bought a big lizard, only a dollar-fifty
Well, that's pretty neat, yeah, it's f-n' nifty
But I just can't afford to feed it
And you should see the way it sh*ts
Dead Milkmen flashback. Lol. Nice!
 

Latest posts

Members online

No members online now.
Top