Wiring up 2 sets of pod lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PointPhoenix

New Member
Joined
Nov 6, 2021
Messages
2
Reaction score
0
Location
Northwest Arkansas
I'm trying to wire up 2 different sets of pods to 2 different switch's. I need one set to activate to my fog light switch (previous owner had the harness to be used by the brights switch but I didn't use it and tried to figure out how it was wired and so I don't think it works anymore.) And the other set well needs to use the brights.

Is there a fuse i can tap for either of them or am I going to have to wire tap?

I've tried the fuse in the cabin that was labeled for the fog lights but it seemed to have a constant output.
 
Last edited:

blackhawk

Full Access Member
Joined
Apr 3, 2013
Messages
264
Reaction score
33
Location
Venezuela
I don´t remember as I did this about 10 years ago use a harness coming from the roof lights (I did not have them installed) and as I bought Led fog lights I just use this harness to give them power. The most funny is that I used the switch with ground connectivity to turn them on and the blue light in the dash kept on.
 
Top