What did you do to your jeep today?

[Gyro]

Your garage is way to neat/clean. Are you going to paint the skids? I scuffed mine then used a truck bed liner, then top coat of paint. Its held up nice, had a couple of spots to re do.Now I can't find that kind, of liner.

It's a 10'x12' baby barn actually.
I touched up a few scuff marks and put a light coat of under coating on the top sides.
Got trans pan(it was ready to leak/inside corrosion) and filter installed,front diff lube changed,TC lube changed,still have the rear diff lube to change and fuel tank skid to install.

Ground down some metal aft of the front tires to eliminate some undesired tire rubbing! Thanks Hitachi!

 

[rockymountain]

Got the new links ready to go:

You must be registered for see images

Operation, "make front end quieter".

DONE:

You must be registered for see images

here's the old ones:

You must be registered for see images

On the right side, the bolt was completely seized to the link on the bottom end. Good 'ol friend PB Blaster worked like a charm and I was able to salvage the bolt. I love my wire wheel on the bench grinder, he's an even better friend. Seem to be more fluid up front but I'm really going to have to get serious to make all those clunks go away up front. I'm thinking bushings all the way around and a new rack. Always something to do I guess.

 

[Ry' N Jen]

Ground down some metal aft of the front tires to eliminate some undesired tire rubbing! Thanks Hitachi!

What exactly did you "grind down"?

 

[Porkchop]

What exactly did you "grind down"?

Im thinking the pinch weld Ry N Jen u 2 hummmm

 

[badkittystt]

Today I wished that I were driving Mr. Darcy as I bum around in Mr. Creep. Mr. Darcy had his transmission hose burst and will be staying a few days at the evil stealership


Sent from my iPhone using Tapatalk

 

[Luke]

^^^ Booooooo

sorry 'bout your luck ... but I guess it could always be worse :shrug:

 

[badkittystt]

^^^ Booooooo

sorry 'bout your luck ... but I guess it could always be worse :shrug:

You're absolutely right it could be worse. I could be an idiot and not notice the transmission slipping and keep going rather than throw in the remainder of my atf I had in the back and drive straight to the dealership. It could have destroyed the transmission, my "lovely" 42rle transmission?:shrug:

 

[tommudd]

Im thinking the pinch weld Ry N Jen u 2 hummmm

Hope not

 

[Ry' N Jen]

Im thinking the pinch weld Ry N Jen u 2 hummmm

Hope not

That's what I was think as well.
If it was the pinch weld and it was ground right down I guess he'll find out the hard way Eh!

 

[Porkchop]

That's what I was think as well.
If it was the pinch weld and it was ground right down I guess he'll find out the hard way Eh!

You bet ya

 

[hectikart]

I put on new plates after wasting 4 hours of my life at the DMV, where for some reason all of the dregs of society seem to congregate. $260...ridiculous

Also, got my hellas working again last night.

 

[Luke]

^^^^^ glad you got those workin'



I added Isolators to the rear ... put on my Spidertrax ... trimmed and heat gunned my air dam and wheel wells and then stared lovingly at my new Duratracs

 

[Ry' N Jen]

We bought a second winch(12000 lbs.), Thule M.O.A.B. roof basket with length extensions, and a Yaesu FT-350AR dual band ham radio. Did it all online and saved a bundle!
Picking them up next weekend when we're down South.

 

[badkittystt]

^^^^^ glad you got those workin'



I added Isolators to the rear ... put on my Spidertrax ... trimmed and heat gunned my air dam and wheel wells and then stared lovingly at my new Duratracs

The Spidertrax are the wheel spacers, right? Do you have pics? I am very interested in doing those after I get a lift on.

Now if only I could find a job so I could actually act out all my fantasies...

 

[Luke]

Yes Ma'am ... I am going to wash n wax her today .. then it's picture time

 

[TheQ]

Filled up the wife's car for @2.99 a gallon!! Put a new window regulator in!!

 

[Red07KJ]

Oil change (Mobil 1 5w20 full synthetic), wash, vacuum

 

[trent.brown]

Bought a rubber mallet from lowes and cut it in half to make my rear bumpstops.

Apparently, there are no hockey pucks at all in western georgia.

 

[Cherrie]

Sorry you must use hockey pucks.

 

[bassmanbob]

Repainted my homemade roof rack and bug shield with some flat black rattle cans from walmart and then used my bottle of touch up paint to fill some scratches. Tomorrow my Liberty gets a bath and detail!