What did you do to your jeep today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WickedBruce

Full Access Member
Joined
Apr 8, 2012
Messages
867
Reaction score
7
Location
San Antonio TX
Got the winch in today...hopefully gonna install it this weekend. Locker should be in the way too, then I can get the 4.56 in there and get this party started
 
Last edited:

Gyro

Full Access Member
Joined
Sep 12, 2012
Messages
408
Reaction score
154
Location
Nova Scotia
The 07 rolled over 85,000kms,did a 5 tire rotation.
5,000kms on last oil change and you can still see the dipstick through the oil.

Gyro
 

jharrisliberty

Full Access Member
Joined
Jan 7, 2016
Messages
283
Reaction score
4
Location
Colorado
Went to the salvage yard today and got a mopar front skid plate and a set of rear hatch struts. All at a very reasonable and cheap price as well. And the skid plate had already been taken off too!
 

blue_kjR417

Platinum Renegade
Joined
Oct 29, 2008
Messages
1,184
Reaction score
1
Location
Jonesboro, AR
Bought 5 MOAB's with 4 crummy all terrains and 1 Goodyear MTR with 60% tread which will be perfect for a spare!

You must be registered for see images attach
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,401
Reaction score
1,261
Location
NJ
what are MOABs going for these days. I want another set, but the local supply is... sparse. I found a set of 4 for $125ea, claims brand new although one wheel has a weight attached to it.
 

ltd02

Comfortably numb
KJ Supporting Member
Joined
Aug 15, 2014
Messages
2,719
Reaction score
246
Location
North Central Maryland
Changed oil (Pennzoil full synth) subbed in 16oz of MMO. Checked all the fluids. Re-torqued the ****** pan and replaced the o-rings on my ****** pressure sensor. Had a slow coolant decrease over the past few months but not a bit this week or so after tightening the top rad hose clamp a while back. Still need to swap the spring clamp back in.
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,401
Reaction score
1,261
Location
NJ
worked on the ballast box yesterday. hopefully going to finish the roughing in today, and get to paint tomorrow, along with final install. a couple of cockups with it, but this version will work for now. maybe in the spring I'll either try and fix it or just build a new one.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
what are MOABs going for these days. I want another set, but the local supply is... sparse. I found a set of 4 for $125ea, claims brand new although one wheel has a weight attached to it.

I have a set of 5 from an 04, only had two sets of tires on them , ( stock and then tthe set thats on them now)
Just bought them but thinking of going another direction
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,401
Reaction score
1,261
Location
NJ
cabinet is built and painted.

also on today's episode of Fixing Your **** Ups...

we learned that rubbing alcohol + tooth brush + elbow grease == getting house paint stains out of your good blue jeans
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,401
Reaction score
1,261
Location
NJ
I have a set of 5 from an 04, only had two sets of tires on them , ( stock and then tthe set thats on them now)
Just bought them but thinking of going another direction

saw that ad. you indirectly answered my question. thanks. :D
 

Birdman330

Full Access Member
Joined
Dec 8, 2013
Messages
667
Reaction score
15
Location
Des Moines, Iowa
Ran over a razorblade RIGHT INTO THE DAMN SHOULDER on the rear left tire. Hoping I have tomorrow off so I can at least pick up a pair of tires, may think about going to 245/70R16 if the price is right. Just so I can see if that corrects the speedo issue more since despite ''being calibrated'' for 235-70 the speedo is off by 2.5mph. So at 70 it reads 72.5mph.
 

jharrisliberty

Full Access Member
Joined
Jan 7, 2016
Messages
283
Reaction score
4
Location
Colorado
Bought a new serpentine belt and tensioner pulley assembly. Going to try and put them on tomorrow. I really hope this fixes my problem.
 

Latest posts

Top