No. Pretty consistent. It's going to have to wait now - I gotta drive it to UT and back. Hopefully it'll be good.
What did you do to your jeep today?
- Thread starter TheQ
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
No. Pretty consistent. It's going to have to wait now - I gotta drive it to UT and back. Hopefully it'll be good.
This evening ( well last evening now I guess )
Radiator
Thermostat and housing
Water pump
flush system
upper and lower hoses
serp belt
tensioner
I think thats it
Oh rotated the tires
Radiator
Thermostat and housing
Water pump
flush system
upper and lower hoses
serp belt
tensioner
I think thats it
Oh rotated the tires
Jim McClain
Full Access Member
Them's some purrty tires ya got there.
Kinda fugly rims though, eh?
Damotee
Full Access Member
Had the front wheel bearings replaced with some Timkens. I thought it would fix the clunking noise I have in the front left wheel when I go over bumps, but nope.
drewwenmoth
Full Access Member
Check your cvs. Could be either side, but definately check your passenger side. Clunk from what you think is a left side is usually right side cv
Sent from my iPhone using Tapatalk
I thought Dave avoids using the "S" word.....
Oh well.. twice the accumulations for you now! :gr_grin:
Oh well.. twice the accumulations for you now! :gr_grin:
Poor little KJ:icon_razz::icon_razz:
Damotee
Full Access Member
Cheers, ill check that out. Its a strange noise. It sounds and feels like something is loose and rattling in the wheel, which is why I thought it was the bearings. Only happens when going over small bumps or dips in the road at low speed. Possibly sway bar bushing or end links?
it's all good. when the time comes it'll be a festival of wrenches and modifications.
found out why the shadow has a misfire; #3 spark plug is broken.
drewwenmoth
Full Access Member
Could be. Hard to say. If you put new bushings on, make sure you dont torque them down until the weight of the jeep is on the ground. Otherwise, if new bushings fixed the problem, the noise will probably return in short order
Sent from my iPhone using Tapatalk
drewwenmoth
Full Access Member
Test fit... fitted?... a jk bumper today. Should be installed tuesday. Will have many pics to post then. Have a detours backbone so i have plenty sturdy mounting points. Been on the hunt for a tj or jk full width bumper for some time, found one local for $100 so i figured why not pick it up. Ill be removing the winch mount as its a winch bumper. So that will be for sale soon pretty cheap as you would need the mounting brackets. But detours was great about sending me out a kit of all the hardwAre when i bought the backbone used so i dont see a reason why they wouldnt sell the brackets themselves with the hardwAre kit (im keeping most of the hardware for the new install). Stay tuned, pics on tuesday hopefully!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Royy
Full Access Member
P0128 popped up on the way to work. It's an easy fix, but I'm not looking forward to having to drain the cooling system again :icon_sad:.
Oh well, it's the first code that's popped up in four months, not too bad for a twelve year old vehicle with unknown history.
Oh well, it's the first code that's popped up in four months, not too bad for a twelve year old vehicle with unknown history.
jharrisliberty
Full Access Member
Should be getting my detour backbone in today! Going to mount it, my winch, and my KC's. Pictures to follow after the install is complete! :gr_grin:
Tuesday bumper ****.........
Dave
vehicles do not come to mind when I read that.
wheeee32
Full Access Member
:happy175::happy175:
misfire solved. new plugs and 2 rounds of seafoam. much smoke, now smooth idle and good acceleration. also discovered where my exhaust leak is. donut gasket at the manifold/down pipe junction is dead. just got back from getting the parts. going to tackle it in a few.
