What did you do to your jeep today?

[DispatchMinion]

I used the 2004 Sebring convertible (stronger lasting part ) BWD- RU1040 resistor pack.

So that works for a Liberty too? as Amazon says "This does not fit your:
2006 Jeep Liberty"

what I got and installed was Dorman 973-025 Blower Motor Resistor for Jeep Liberty/Wrangler and it seems to have failed already, back to only getting level 4 fan

 

[tommudd]

So that works for a Liberty too? as Amazon says "This does not fit your:
2006 Jeep Liberty"

what I got and installed was Dorman 973-025 Blower Motor Resistor for Jeep Liberty/Wrangler and it seems to have failed already, back to only getting level 4 fan

Yes they work great, many have been using them for years now

 

[LibertyTC]

^ Yes the BWD - RU1040 fits perfectly, including connector.
It is known in the forums that the 2004 Sebring convertible part is a direct cross over.

 

[sota]

^ Yes the BWD - RU1040 fits perfectly, including connector.
It is known in the forums that the 2004 Sebring convertible part is a direct cross over.

(actual) chryslers share many parts like that.

I say actual because, some chryslers are really mitsubishis.

 

[RedrazSC]

Both front upper control arms
Both front lower ball joints
Both front cv axles
Oil change

 

[tommudd]

Both front upper control arms
Both front lower ball joints
Both front cv axles
Oil change

Since wanting to lift should of gotten lift and bought the JBA UCAs with rebuildable ball joints

 

[nohitter64]

Heard a metal clank while my daughter moved it this morning...taking it in tomorrow. Front right axle giving me more trouble I think[emoji2959]

Sent from my SM-G950U using Tapatalk

Turns out not the front...emergency brake rivets gave out and bracket broke off. Well that's a new one to me....

Sent from my SM-G950U using Tapatalk

 

[Jo6pak]

Picked up oil/filter and air filter. Already time for another oil change.


Just now getting everything ready for rabbit hunting in the morning.
Temps are forecast for mid-teens with a bit of snow. Should be a great morning to be in the woods!
:hunter:

 

[jeeper03]

Contemplated which one to use and build.

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[LibertyTC]

Turns out not the front...emergency brake rivets gave out and bracket broke off. Well that's a new one to me....

Sent from my SM-G950U using Tapatalk

The rear braking plates are well exposed & can rust area/ the rivets easily.
I had to wire brush, hand paint & some spray, with 6 coats to hopefully save them.

You must be registered for see images attach

Every 2 years inspect the rear interior ebrake shoes & rivets.
Give a little squirt of oil into the rivets if you can too.
Replacing the backing plate..well...no fun.

 

[turblediesel]

Contemplated which one to use and build.

You must be registered for see images attach

Sent from my iPhone using Tapatalk

Middle.

 

[CherokeeLiberty]

I found my rear driver's window close to falling down...

 

[LibertyTC]

^ EEK inspection time & link: Steiger Performance - Jeep Liberty Power Window Regulator Repair Kit

 

[ltd02]

Backed it out of the mud. Ready for the slop this week.

 

[LibertyTC]

My current slop is...

You must be registered for see images attach

 

[CherokeeLiberty]

^ EEK inspection time & link: Steiger Performance - Jeep Liberty Power Window Regulator Repair Kit

Thanks. He says this part only works for up to '06 and I have n '07, though... I'll probably still order it to try andmodify it if need be. Until then, I'll have it wedged in place :gr_grin:

 

[duderz7]

Thanks. He says this part only works for up to '06 and I have n '07, though... I'll probably still order it to try andmodify it if need be. Until then, I'll have it wedged in place :gr_grin:

I found a similar kit on Amazon for much less, worked great in my 05. That was year's ago though

 

[turblediesel]

Backed it out of the mud. Ready for the slop this week.

Maryland has some high quality mud! I tried jacking my VW bus on a nice green level MD lawn and the jack just disappeared.

 

[JasonJ]

Over the weekend got around to fixing my sway bar issue. The bolt is now not at such an angle and the link is no longer hitting on the bar.

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk

Shouldn't there be a rubber spring seat under that front coil spring, on the bottom?

 

[jeeper03]

Middle.

I was thinking the one on the right. Why the middle?