Lift pics and spec thread

[bigBlue]

Lf-22
rf-22.25
lr-22
rr-22

 

[nmadd118]

full OME and 245/75 goodyear wrangler authority on painted stock wheels

yet to measure fender heights

 

[Rennagade]

Nice nmadd, I have same tires with all kinds of rubbing going on. I ordered my lift Saturday and will put it on as soon as I can.

 

[0uTkAsT]

full OME and 245/75 goodyear wrangler authority on painted stock wheels

yet to measure fender heights

This is probably my favorite Liberty so far... I like your rig a lot. Simple but well done. Badass but not showy. I will be using your truck for inspiration!

 

[baris]

full OME and 245/75 goodyear wrangler authority on painted stock wheels

yet to measure fender heights

I want to use your combination(both the tire size and the lift kit) on my 2002 kj 3.7 limited. But the front fog lights are at the below than yours. Do i have any problem??

 

[Armysniper]

2004 Rocky Mountain Edition (skids, 17" Chrome Clad/Silent Armor's) 38 k miles.
Front: OME 927 with Bilstein part #F4-BE5-6458-H7
Boiler's 3/8 inch steel top plate spacer
Clevis Lift 2 conduits passenger side 3 drivers side (to level)
Tera-Flex front bump stops.
Jeepin By Al 4.5 Upper Control Arms
22.75 hub to flare when new (now 22.5?)

Rear OME 948 with Bilstein part # F4-BE5-A702--H0
Used Played Hockey pucks for bumpstops!
One extra OEM rear isolator.
Trac-Lok rear end : Needed New lower control arm bushings, filled in with urethane!
Spidertrax 1.25 wheel spacers now installed.
47095[/ATTACH]"]

You must be registered for see images attach

Nice liberty you got there. Love the look with the lift

 

[TwoBobsKJ]

I want to use your combination(both the tire size and the lift kit) on my 2002 kj 3.7 limited. But the front fog lights are at the below than yours. Do i have any problem??

No, you're fine. Many of us with the 2002 through 2004 bumpers have the same lift and tire combination. You may have to use a heat gun on the fender liner near the fog light doors but that's an easy modification.

Bob

 

[Wulfhound]

Here's my 2012 KK with the mudd econo 3.5" lift, 15x7's w/ 31x10.5offbrand AT's.
Whether u go with the Frankin lift or JBA's Mudd Econo lift you'll be happy

You must be registered for see images attach

 

[TheBlueKJ]

Here's my 2012 KK with the mudd econo 3.5" lift, 15x7's w/ 31x10.5offbrand AT's.
Whether u go with the Frankin lift or JBA's Mudd Econo lift you'll be happy

You must be registered for see images attach

How visible are your turns and tails since you've completely blacked em out? Sorry to go off topic but I'm curious

 

[Wulfhound]

How visible are your turns and tails since you've completely blacked em out? Sorry to go off topic but I'm curious

you can see them just fine they are not totally blacked out you can still see through them I only put 3-4 light coats of VHT on them.

You must be registered for see images attach

 

[dude1116]

How visible are your turns and tails since you've completely blacked em out? Sorry to go off topic but I'm curious

you can see them just fine they are not totally blacked out you can still see through them I only put 3-4 light coats of VHT on them.

You must be registered for see images attach

VHT is good stuff. It shows a really good amount of light through, but you'll get nuisance tickets left and right for having fully tinted tails here in Jersey. Also I would never cover up my reverse lights for anything. They're too precious for my nighttime woods driving.

I actually have a half full can that I'm not using at my house down by school if you're ever gonna be in the area. I don't ever use the stuff. I hear it comes off real easy with paint thinner if you want to experiment.

 

[Wulfhound]

VHT is good stuff. It shows a really good amount of light through, but you'll get nuisance tickets left and right for having fully tinted tails here in Jersey. Also I would never cover up my reverse lights for anything. They're too precious for my nighttime woods driving.

I actually have a half full can that I'm not using at my house down by school if you're ever gonna be in the area. I don't ever use the stuff. I hear it comes off real easy with paint thinner if you want to experiment.

Reverse lights are not painted I left them clear for that exact reason Backing up at night in the hills

 

[TheBlueKJ]

I wouldn't do my reverse lights and I'm just gonna smoke 'em not do a full black out.

EDIT: And I've got a full can at my house so I'm all set

 

[KS06Kj]

2006 Liberty Sport 4x4

2" BDS Suspension Lift
21.5 Hub Center to Fender for a gain of 3"
Tires Cooper ATP 225/75/16's

You must be registered for see images

[/url]20141204_161135 by Lovin Our Life Adventures, on Flickr[/IMG]
Before

You must be registered for see images

[/url]20141206_123331 by Lovin Our Life Adventures, on Flickr[/IMG]
After

 

[tommudd]

2006 Liberty Sport 4x4

2" BDS Suspension Lift
21.5 Hub Center to Fender for a gain of 3"
Tires Cooper ATP 225/75/16's

You must be registered for see images

[/url]20141204_161135 by Lovin Our Life Adventures, on Flickr[/IMG]
Before

You must be registered for see images

[/url]20141206_123331 by Lovin Our Life Adventures, on Flickr[/IMG]
After

So you were sagged at least a half inch
looks better

 

[KS06Kj]

Thanks Tom. Ride is much better also.

 

[ktmrider]

2.5 JBA kit w 255/70-16's

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[wheeee32]

Did you notch your bumpstops?^^

 

[tommudd]

Did you notch your bumpstops?^^

Looks like he still needs to do that

 

[ktmrider]

Looks like he still needs to do that

I did not..in the center I take it?