TwoBobsKJ
Full Access Member
Someone's gonna get a sweet ride. Enjoy your time away - when you return pick up a '13 KK and turn it into the same bada** ride you've had with your KJ
eace:Bob
What did you do to your jeep today?
- Thread starter TheQ
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Someone's gonna get a sweet ride. Enjoy your time away - when you return pick up a '13 KK and turn it into the same bada** ride you've had with your KJ
eace:Bob
profdlp
Fired
Best of luck to you and your outfit. Spend that time planning for what Bob suggested and build a beast on your return. :cheers:
TheBlueKJ
Full Access Member
Anyone have a pic of where the oil sending unit is? I'm almost positive that's where my leak is since my valve covers are all dry
EDIT: or atleast of what it looks like
EDIT: or atleast of what it looks like
martin_metal_88
Full Access Member
Have a nice time in korea and we all hope you can find a loving new owner for your KJ. Tell him about this place so we can keep an eye on your baby
On my side, have to drive 100km a day for the new job but building offshore ship is awesome.
On my side, have to drive 100km a day for the new job but building offshore ship is awesome.
WickedBruce
Full Access Member
Got the flowmaster on
tjkj2002
Full Access Member
- Joined
- Dec 17, 2006
- Messages
- 10,612
- Reaction score
- 41
It's the only sensor that is directly above the oil filter,can't miss it.
It's the sensor right above the blue Puralator filter in the pic with 2 white'ish colored wires.
You must be registered for see images
Last edited:
NineFingerFury
New Member
Did this week: front & rear diffs with 80-90 Valvoline. Transfer case with Valvoline ATF+4.
Next on my list: trans pan drop, filter and refill.
Next on my list: trans pan drop, filter and refill.
CzarKJ
Full Access Member
Installed a fire extinguisher on my shelf. Currently in process: rust removal then painting underneath where my new front skid plate will go. Degreasing front skid plate and then rust removal and painting. Hopefully I can get it installed tonight/tomorrow. I gotta find some hardware for it...
TheBlueKJ
Full Access Member
Changed oil, wipers and tinted turns and tails and went wheeling
TwoBobsKJ
Full Access Member
Just sent PayPal payment to fellow KJ'er AZScout over on LOST. He sold me a set of modified BoulderBars - sliders will be on the KJ in time for the LOST East Coast Safari in Tennessee in October! :signs6:
The BoulderBars were modded by All J's in Big Bear - they run the full length from under the front flares to under the rear flares. They also have an angled bar to protect the bottom of the doors.
Modified BoulderBars
Haven't been able to install my new 4X Guard trans skid yet - my '03 is one of the red-headed stepchildren that has a non-standard downpipe and crosspipe on the driver's side cat. Marlin at JBA is shipping me a modded one on Monday so by next weekend I'll have the new rock rails and trans skid installed - ready to hit the trails. Woop woop!
Bob
The BoulderBars were modded by All J's in Big Bear - they run the full length from under the front flares to under the rear flares. They also have an angled bar to protect the bottom of the doors.
Modified BoulderBars
Haven't been able to install my new 4X Guard trans skid yet - my '03 is one of the red-headed stepchildren that has a non-standard downpipe and crosspipe on the driver's side cat. Marlin at JBA is shipping me a modded one on Monday so by next weekend I'll have the new rock rails and trans skid installed - ready to hit the trails. Woop woop!
You must be registered for see images
Bob
jankerson
Full Access Member
Clay Bared it and Waxed it.
tjkj2002
Full Access Member
- Joined
- Dec 17, 2006
- Messages
- 10,612
- Reaction score
- 41
Ordered 2 pairs of Rigids Dually's spots.Time to mod the Renny lightbar:rockit:.Gotta a idea,hope it works out to make the Dually's look right in the 4" openings.
Anyone want to but 4 Renny lightbar light housings(just the lights,not the whole lightbar)?
Anyone want to but 4 Renny lightbar light housings(just the lights,not the whole lightbar)?
TwoBobsKJ
Full Access Member
tjkj2002
Full Access Member
- Joined
- Dec 17, 2006
- Messages
- 10,612
- Reaction score
- 41
I'd think $50 for all 4 with bulbs would do it,plus shipping that couldn't be more then say $15.
Wulfhound
Full Access Member
SRD Offraod show & tell
Here is what I did yesterday went to SRD offroad show & tell and entered the Li'l Mule I did not win but got a lot of I have never seen a lifted liberty:uhoh2: then I put on the steep RTI ramp then got the I'm impressed comments and looks:Whoa:
Had a blast now if I could figure out how to get some sponsers and get some goodies I might be more of a contender standing besides the JK's and XJ's:smokin:
Me on the ramp
The Jeep Line up
Buddy's XJ the Articulation winner @ 77"
Here is what I did yesterday went to SRD offroad show & tell and entered the Li'l Mule I did not win but got a lot of I have never seen a lifted liberty:uhoh2: then I put on the steep RTI ramp then got the I'm impressed comments and looks:Whoa:
Had a blast now if I could figure out how to get some sponsers and get some goodies I might be more of a contender standing besides the JK's and XJ's:smokin:
Me on the ramp
You must be registered for see images attach
The Jeep Line up
You must be registered for see images attach
You must be registered for see images attach
Buddy's XJ the Articulation winner @ 77"
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
wheeee32
Full Access Member
Holy crap on the XJ.:rockit: I expect to get a few :Whoa: after this coming weekend.:smokin:
Wulfhound
Full Access Member
yea he was @ 5psi for this his first run he went a little higher but in reverse.
some of the JK owners said he was cheating by going in reverse hahaha he still beat them all by a couple inches
