What did you do to your jeep today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
Yesterday took a KJ from PA that was trying to be a lowrider and pumped it up some , then finished welding up a Rock Lizard rack for a KK
always a crowd doing something
You must be registered for see images attach

You must be registered for see images attach

KK Rock Lizard rack started with two pieces, ended with one
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

TwoBobsKJ

Full Access Member
Joined
Jan 28, 2011
Messages
2,637
Reaction score
19
Location
Northern Ohio
Yesterday took a KJ from PA that was trying to be a lowrider and pumped it up some , then finished welding up a Rock Lizard rack for a KK
always a crowd doing something

Tom, you're not kidding - quite a crowd in Stanton!

Ted's RL rack looks really good. Is he gonna paint it black or bedline or...?

Bob
 

Leeann

Full Access Member
Joined
Mar 9, 2013
Messages
2,440
Reaction score
251
Location
Maryland
Took ours over to the CILs (cousin-in-law's) place roday to check on a weak blower fan, then went out on his cabin cruiser for a ride. Nice day for a boat ride.

At one point, we had 3 Libby's in the driveway: the CILs '06, my '05 and their other cousin's daughter's '02.
 

HoosierJeeper

Gold Supporter/Admin
Staff member
Administrator
Joined
Jan 20, 2009
Messages
20,874
Reaction score
299
Location
Western WI
Replaced the front driveshaft t case CV...no more clicking, ratcheting, humming or roaring in 4WD. :D
 

Luke

Interloper
Joined
Oct 21, 2008
Messages
4,212
Reaction score
700
Location
Bancroft, Canada
New end links ... this one gave up it's life for my fun :D

You must be registered for see images attach
 

Drakko05KJ

New Member
Joined
Apr 15, 2013
Messages
11
Reaction score
0
Location
MD
Fitted 265/65/17 Dynapro ATM's a few weeks back but just getting around to upload pics.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

rockymountain

Full Access Member
Joined
Apr 20, 2007
Messages
1,734
Reaction score
27
Location
Spencerville, IN
New driver's side window regulator.
I got a cheap one off ebay just like i did for the passenger side at the beginning of the summer. It's best if you use your OEM motor though because the cheap one is loud. Takes a minute to swap them. I realized that using the auto down it was bottoming out, since I bought it 6 years ago and then finally the tube gave way the the worm came slithering out. Now it comes down and stops smoothly, can't even hear it stop where before it banged a little.
 

Cardhu

Full Access Member
Joined
Aug 29, 2011
Messages
685
Reaction score
5
Location
Great White North
Saturday, Towed back a new to me 2008 Smokercraft Pro angler 171 with a 115 Optimax about 750 KM. 3rd gear OD off, 2400 rpm, 90 km/h while getting 15 - 16.5 L/ 100KM, or around 14 -15 mpg.

Considering without the trailer I get 17.5 mpg at 75 MPG without towing 2500 +lbs I'd say it isn't too bad.

For the record, i had no chance of towing this thing with stock gearing in 4th gear unless i pushed way past the speed limit.

Then i launched it yesterday. Pics when i dump the camera.

Also hit 100,000 KM after 6.5 years.
 
Last edited:

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
Saturday, Towed back a new to me 2008 Smokercraft Pro angler 171 with a 115 Optimax about 750 KM. 3rd gear OD off, 2400 rpm, 90 km/h while getting 15 - 16.5 L/ 100KM, or around 14 -15 mpg.

Considering without the trailer I get 17.5 mpg at 75 MPG without towing 2500 +lbs I'd say it isn't too bad.

For the record, i had no chance of towing this thing with stock gearing in 4th gear unless i pushed way past the speed limit.

Then i launched it yesterday. Pics when i dump the camera.

Also hit 100,000 KM after 6.5 years.

Time to regear :gr_grin:
Then you'll get way better mileage and can pull it easier
 

Drakko05KJ

New Member
Joined
Apr 15, 2013
Messages
11
Reaction score
0
Location
MD
Are you planning on relocating the washer bottle?

No. The tire doesn't rub on or near the bottle. The only rub I have is in reverse when near full lock and it rubs on the pinch weld which I flatten as much as I could.

Today modded my cigarette lighter to cut off when I shut the Jeep off so I don't have to disconnect my gps anymore.
 

Rennagade

Full Access Member
Joined
Oct 7, 2012
Messages
97
Reaction score
2
Location
North-East PA
Changed my water pump... After 131,000 miles. Installed steering wheel controls for the radio (works awesome) and changed the fan speed resistor card behind the glove box. Everything is working great now and had lots of fun working on the Jeep as always.
 

Cardhu

Full Access Member
Joined
Aug 29, 2011
Messages
685
Reaction score
5
Location
Great White North
Time to regear :gr_grin:
Then you'll get way better mileage and can pull it easier

Unless a 410 front diff drops in my lap for the right price i'll be saving for jba SIFS and DTT with 456 front and rear.

No way i'll be staying open / open if i take the plunge.
 

ionizer

New Member
Joined
Sep 3, 2013
Messages
14
Reaction score
0
Location
canada
Maybe got the profile pic uploaded. Aswell as a couple in my albums. Duratracs stacked neatly in my garage waiting patiently for the old man emu, jba, please hurry hmmmmmmmmm
 

tjkj2002

Full Access Member
Joined
Dec 17, 2006
Messages
10,612
Reaction score
41
Location
Somewhere between being sane and insane!
That time of the year................

-New plugs
-new oil/filter(hit 1500 miles again)
-new PCV valve
-cleaned air filter
-new PS fluid
-partially greased Jeep
-checked air pressure in tires
-checked lugnut torque
-tested battery(still putting out 1073cca's)
-flushed brake fluid
-tested coolant(-66 degree protection)
-changed rear diff gear oil with fresh Valvoline 85w-140
-changed t-case fluid with fresh Valvoline VR1 synthetic 20w-50
-will rotate/balance tires and check alignment at work tomorrow
 

Latest posts

Members online

No members online now.
Top