What did you do to your jeep today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Leeann

Full Access Member
Joined
Mar 9, 2013
Messages
2,440
Reaction score
251
Location
Maryland
In the couch. And since I have a kegerator, I can holler for beer rvry hour, easy.

;)
 

Leeann

Full Access Member
Joined
Mar 9, 2013
Messages
2,440
Reaction score
251
Location
Maryland
This sounds like a Jack Daniel's sort of injury...

I was dead sober and it was 12:45 pm. The steps are scary - everyone hates them. Not to code - not deep treads, extra high risers, big bullnose on the front of the tread which is bad with not deep enough treads.
 

profdlp

Fired
Joined
May 21, 2013
Messages
5,835
Reaction score
1,804
Location
Westlake, Ohio
This sounds like a Jack Daniel's sort of injury...
I was dead sober and it was 12:45 pm...
I read Kal-El's comment as a prescription for treatment after the injury. (Alcy)

...The steps are scary - everyone hates them. Not to code - not deep treads, extra high risers, big bullnose on the front of the tread which is bad with not deep enough treads.
The house I grew up in had stairs in the back yard leading down to the underground basement. Steep, concrete all the way down, narrow, and every spring they would grow a nice layer of a slime and moss combo just to add a little randomness to the whole deal.
 

Jim McClain

Full Access Member
Joined
Jul 31, 2015
Messages
429
Reaction score
2
Location
Teh REAL No. CA
I took my new roof rack basket out for a test drive with a couple oxygen tanks strapped in. It's been raining for days, so I didn't think I would get any decent photos, but I did take some of the KJ.

You must be registered for see images
 

Leeann

Full Access Member
Joined
Mar 9, 2013
Messages
2,440
Reaction score
251
Location
Maryland
I read Kal-El's comment as a prescription for treatment after the injury. (Alcy)


The house I grew up in had stairs in the back yard leading down to the underground basement. Steep, concrete all the way down, narrow, and every spring they would grow a nice layer of a slime and moss combo just to add a little randomness to the whole deal.

Now that treatment I could go for.

My steps are dry; the concrete even has a zillion pebbles embedded in it. They're just too steep, too high and too short. No one likes them.

It's actually not my first accident on them. I was leaning on the railing talking to my husband when the railing failed, sending me backwards onto the doors for the basement steps. Which my husband had closed not even 5 mins before, or I wouldn't be here.
 

jharrisliberty

Full Access Member
Joined
Jan 7, 2016
Messages
283
Reaction score
4
Location
Colorado
U-Pull on 66th or the one in Aurora? I need some rear seat head cushions- didn't have 'em when I bought it.

Neither of those. It was actually Littleton U-Pull. It is a separate yard on the southwest side of Denver. They always have the most KJ's. And the prices on the parts are significantly cheaper than either of the two U-Pull yards.

I got my JBA a arms installed as well as the top plates and the rear isolators. Now the rear finally looks like it is lifted.
 
Last edited:

Jbergun

Full Access Member
Joined
Jun 4, 2015
Messages
1,009
Reaction score
2
Location
Chicago
Picked up a ****** today.

Picked it up at 8am this morning. Looking good!

You must be registered for see images attach


You must be registered for see images attach
 

uglyboy

New Member
Joined
Jun 12, 2017
Messages
0
Reaction score
0
Location
N Y
Hi, Can ANYONE please tell me where to look for & unclog/replace the transfer case breather on a '06 with a NV 231 J transfer case? It must've clogged as it emptied it self out, AND why?
 

Leeann

Full Access Member
Joined
Mar 9, 2013
Messages
2,440
Reaction score
251
Location
Maryland
Exactly!!! Apologies if it sounded otherwise. Beer is just a little too slow to get the desired effect. Best wishes for a speedy recovery Leann!

It's all me - slow because of both pain and Percoset.

Doc tomorrow, dangit :(
 

K9JEEP

Full Access Member
Joined
Feb 9, 2017
Messages
53
Reaction score
0
Location
SOCAL
Pads, rotors and new fluid in.
Went with Stop Tech rotors, Posi pads and VW fluid.
OEM rotors and pads went for 43k before metal to metal, fluid also looks to have never been changed. So in all brakes feel much stronger, pedal is a bit firmer too
You must be registered for see images


Sent from my SM-N920T using Tapatalk
 

dude1116

Full Access Member
Joined
May 31, 2011
Messages
3,373
Reaction score
13
Location
Pompton Plains, NJ
Just did my rear calipers, pads, and rotors. Lubed up the pivoting part of the e-brake with some anti seize. The e-brake still doesn't work.

Brake pedal is still a bit soft. I'm going to re-bleed the brakes, then eventually do the fronts. I have a feeling this is going to end with a new master cylinder.
 

profdlp

Fired
Joined
May 21, 2013
Messages
5,835
Reaction score
1,804
Location
Westlake, Ohio
(Yesterday)

Crossed the 84,500 mark. Why is this significant? When I bought it, the Jeep had 42,250 miles on it. I have now surpassed the total mileage of the (sole) previous owner.
 

GunnerSchenck

Full Access Member
Joined
Dec 24, 2014
Messages
850
Reaction score
9
Location
Sugar Grove, Warren County, Pennsylvania
Just did my rear calipers, pads, and rotors. Lubed up the pivoting part of the e-brake with some anti seize. The e-brake still doesn't work.

Brake pedal is still a bit soft. I'm going to re-bleed the brakes, then eventually do the fronts. I have a feeling this is going to end with a new master cylinder.

You already empty all the old fluid out by letting it drain while new fluid pushes it out I'd imagine?
 

TAT

Full Access Member
Joined
Jun 11, 2017
Messages
76
Reaction score
0
Location
TEXAS
Well let's see...... This wasn't today but last week. My son and I installed his daystar 2.5" inch lift. Front and rear. New struts were used and installed the daystar onto those. New shocks in rear with daystar spacers. I did a partial alignment in the driveway since it was horrible after the install! Lol. Got it best I could. Then we went straight in the house and ordered JBA LIFTED UCA's, plus new terra flex bump stops and moog lower ball joints.

Then scored a helluva deal on a new set of cooper stt's. 30 9.5 15. 300 bucks for all 4 off of craigslist.

Yesterday I ordered a set cragar soft 8's in 15x7 4" bs. Decided to go with black rock center caps since wheels are black. Now I need to order some black lug nuts.

After talking with a few people on here, I will ordering JBA struts to change from daystar spacer lift and new coils for the rear we can remove the daystar lift blocks. Might as well get us brake lines too! Lol. I'm sure I'm forgetting something but the order will be put in to JBA ASAP! Gotta love the snowball effect. More to come as the parts arrive. Wheels should be here on the 16th and JBA control arms tomorrow!
 

tjkj2002

Full Access Member
Joined
Dec 17, 2006
Messages
10,612
Reaction score
41
Location
Somewhere between being sane and insane!
Yesterday I made a FJ loser owner feel "inadequate".

Background........

Tuner guy(lowered honda's and the like) buy's FJ,lifts it and put's 26" wheels and low profile tires on it.Brings it into my shop for a alignment and asks for me to do the alignment since I was recommended by another on a FJ forum.Guy is all cocky thinking his FJ is the baddest offroad vehicle with 26" rims and 35 series street tires and wants to be sure I'm a gear head that has experience aligning modded offroad vehicles and co-workers state I have a modded Jeep.He asks what kind of Jeep and they say it's a Liberty,he starts laughing till one of them points out my KJ.

The look on his face was priceless and then had "I want to kill you" look on his face the entire time I was aligning his piece of junk.
 

Leeann

Full Access Member
Joined
Mar 9, 2013
Messages
2,440
Reaction score
251
Location
Maryland
^ :happy175:



I have to have surgery. 4-5 hr surgery, too. Rods, screws, possibly plates....they might even throw in the kitchen sink.
 

Latest posts

Members online

Top