What did you do to your jeep today?

[railink]

Saturday, off to the pick and pull....

Went for a blower resistor yup, that’s all.
Got the resistor, renegade roof rack, evic, tow hooks......

Left the skid plates, don’t know if the ones off the 04 will fit my 07.....

Just blower resistor yeah right lol

 

[tommudd]

Saturday, off to the pick and pull....

Went for a blower resistor yup, that’s all.
Got the resistor, renegade roof rack, evic, tow hooks......

Left the skid plates, don’t know if the ones off the 04 will fit my 07.....

Just blower resistor yeah right lol

So thats who you are on here .................:happy175:
seen your post of course on Fakebook
Go back and grab the front and rear diffs out of that blue 4 cylinder , should be 4.10s

 

[sota]

:werd:

unicorn diffs.

 

[tommudd]

:werd:

unicorn diffs.

Yes I'm down to only one spare front 4.10 diff, no extra/ spare rear ones anymore
what to do .....? LOL

 

[profdlp]

Yes I'm down to only one spare front 4.10 diff, no extra/ spare rear ones anymore
what to do .....? LOL

Find a rear one so you can do mine this summer.

 

[tommudd]

Find a rear one so you can do mine this summer.

Are you really up to me ( you and me ) working on your Jeep again ? :happy175:
We won't have Bob or Mac this round ! :icon_razz::icon_razz:

 

[tommudd]

Oh yes
Just finished oil and filter, tire rotation, airfilter, PCV, and checking all other fluids and brakes plus greasing everything . Now for another 3-4000 miles :gr_grin:

 

[sota]

I'm just going to start saving my babysitting money and get both diffs done as 4.10s with DTTs soon.

 

[profdlp]

Are you really up to me ( you and me ) working on your Jeep again ? :happy175:
We won't have Bob or Mac this round ! :icon_razz::icon_razz:

I think we'll have to call Bob out of retirement for this. I'd love to get together with you all anyway, even if it were working on someone else's Jeep.

 

[Jo6pak]

Washed it.

 

[sota]

started ordering parts for the switches ideas, mostly the trim panel to mount the switches to.

You must be registered for see images attach

note that it's size adjustable, so I can play with a couple other location ideas.
figure if I don't at least start getting things I'll never get it done.
parts jeep is definitely in my future, as I'm going to want a spare headliner.

 

[sota]

Also, anyone ever do an extended handle for the 4x4 lever? wish it wasn't so damn low when i'm plowing, as i'm going in and out of 2/4/LO a lot during the day. be nice to not have to lean over to grab it.

 

[sota]

anyone know where to get a 12-way ATM/APM fuse block with distribution?
I can find ATC/ATO ones all day, but not ATM/APM.

 

[tommudd]

Look out folks, sota is on a roll tonight , be prepared to answer lots of questions :happy175:

 

[tommudd]

started ordering parts for the switches ideas, mostly the trim panel to mount the switches to.

You must be registered for see images attach

note that it's size adjustable, so I can play with a couple other location ideas.
figure if I don't at least start getting things I'll never get it done.
parts jeep is definitely in my future, as I'm going to want a spare headliner.

Just went out to the garage and was sitting in the KJ and noticed that above the windshield is very reachable for switches , gave me some other ideas for a couple of things. Still need to get my " old fashioned " dimmer switch idea going then on to next thing though. LOL

 

[sota]

I remember back in the day when CBs were hung in that general area. Problem with the KJ is the dome light is too far forward to make that work right now. However one bright *snicker* spot of that is I think you could also put some switches on the rear-facing slope of the dome light hump as well.

and what's wrong with the occasional brain dump!

 

[profdlp]

Got the rear lower control arm recall finally done. Two hours and out the door, just like they promised. It would have been quicker but they spent at least half an hour looking for the parts they ordered over a month ago... :Insane:

 

[turblediesel]

Installed my VW ARP studs overnight. Still need to do some measuring, thread chasing, or grinding since one of them bottomed out and sticks up .050" more than the others. Jeep seems to like the new torque wrench I got it for Christmas. Not even a card or thankyou note from the jeep.

 

[drewwenmoth]

Also, anyone ever do an extended handle for the 4x4 lever? wish it wasn't so damn low when i'm plowing, as i'm going in and out of 2/4/LO a lot during the day. be nice to not have to lean over to grab it.

You could probably fab something up thats removeable. Im thinking a conduit clamp with some all-thread up through a pipe and throw a fun 8ball or skull shift knob on the end of it. That way when plow season is over you could take it off?


Sent from my iPhone using Tapatalk

 

[first&lastKJ]

UPS dropped off the Bilstein front shocks and OME springs today.